Data Sheet

Product Specification Sheet APS340 - Rev. 08/2013
OH600 / OH601 Series Flush Panel Backbox/Housings
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS339) Next (APS341) >
OH600 Flush Backbox (shown in a vertical configuration -
it is sometimes used in a horizontal configuration
depending on station)
OH601 Flush
Backbox
Architects' And Engineers' Specifications
The flush back box(es) shall be Alpha Communications® model
OH600 or OH601 or approved equal. The OH600 shall be made of
galvanized steel and the OH601 shall be made of steel, and
painted in a Grey powder coated epoxy finish, or of
galvanized steel. All models shall have standard electrical
knockouts on the top and bottom (when mounted vertically), to
allow for wire access.
Contractor shall observe all local and national electrical and
building codes.
OH600 / OH601 Flush Backboxes
The Alpha Communications® models OH600 and OH601 are flush
mounting backboxes. The OH600 is made of galvanized steel and
the OH601 is made of steel, painted in a Grey powder coat epoxy
painted finish for durability, or in galvanized steel They are our
most popular flush mounting boxes, and are used with a variety of
flush mount intercom entry lobby panels, and remote intercom
stations.
The painted boxes are finished on top, bottom, both sides, and the
back and both models have standard electrical knockouts on the
top and bottom (when mounted vertically), to allow for wire
access. These boxes are designed to be attached to
mounting studs or set directly into a concrete or masonry wall..
An adjustable 'tinnerman' mounting clip on the top and bottom
(when mounted vertically) allows the finished panel/station to be
mounted level, even if the back box is installed slightly crooked.
They are typically used with the ES612, AM612 and AM642 series
lobby entry panel stations, but can be used with other stations as
well. The OH600 can also be used with the IR150SS area of rescue
assistance remote station(s), when mounted horizontally.
Specifications
OH600:
Height: 10.25" (261mm)
Width: 4.25" (108mm)
Depth: 2.00" (51mm)(when mounted vertically)
OH601:
Height: 16.25" (413mm)
Width: 4.25" (108mm)
Depth: 2.00" (51mm)