Data Sheet
Product Specification Sheet APS649 - Rev. 07/2013
PK124K Battery Back-Up Kit (used for battery back-up)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS648) Next (APS650) >
Architects' And Engineers'
Specifications
The battery charger kit(s) shall be Alpha
Communications® / TekTone model PK124K,
or approved equal. The PK124K shall
provide continuous battery charging for
approximately 6 hours for uninterrupted
equipment operation during power failures.
The PK124K kit shall be housed an the IH151N
surface mount equipment cabinet, and shall
include 1- SS106 24VAC transformer , 2- BA001
(12VDC) rechargeable batteries and 1- PK124
battery charger unit.
Contractor shall observe all local and national
electrical and building codes.
PK124K Battery Back-Up Kit
The Alpha Communications® / TekTone PK124K battery backup kit provides for
continuous battery charging so that if power system equipment is interrupted,
standby operating power is provided for up to approximately 6 hours. (Time may vary
depending on system size.)
Alpha Communications® systems which support the PK124K include NC110N, NC150N
and NC200N Nurse Call Systems, DS100 Door Sentry Audible/Visual Emergency Alarm
System, AlphaEcall™ and CM800/CM900 Emergency Alarm System, as well as the
NC150R Area of Rescue Assistance systems.
The PK124K may also be used for battery backup on various Alpha Communications®
apartment entrance system amplifiers.
The PK124K kit includes 1- IH151N surface equipment cabinet, 1- SS106 24VAC
transformer, 2- BA001 (12VDC) rechargeable batteries and 1- PK124 battery charger
unit.
Features
Low voltage operation
Reliable alternate power supply
Integrated circuit design
Easy installation
Specifications
Dimensions:
The IH151N cabinet which houses all of the PK124K
components is 11.50"W (293mm) x 11.75"H (299mm) x
3.63"D (93mm). All dimensions shown are outside
dimensions.
Finish: Beige Enamel painted finish.
Knockout:
Five (5) total on four (4) sides. One (1) on front
cabinet cover, for optional installation of customer
supplied lock assembly.