Data Sheet

Product Specification Sheet APS585 - Rev. 07/2013
TE903/TE903NP Surface Mount Telephone Entry Master Stations
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Lexan is a registered trademark of G.E. Corp
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS584) Next (APS586) >
TE903 (standard 'Dialer' type)
TE903NP (No-Phone-Bill' type)
Architects' And Engineers'
Specifications
Alpha Communications® surface mount
Series Telephone Entry System is a
complete automatic call and entry
control system. The system operates on
a standard dedicated telephone line and
110 VAC with 16 VAC transformer.
All faceplates shall be constructed of 16
gauge stainless steel and shall include a
zinc die-cast marine quality keypad,
speaker/microphone, postal release
option, and an RJ Plug Connector. The
TEK-Entry Modular Series allows for 1 -
750 apartment capacity (with 7/10/11
digit dialing capabilities).
Both the TE903 and TE903NP models
shall include an integral 100 name
directory with a Lexan®
Window, although more than 100 names
may be possible if a smaller font is used.
NOTE: See installation/use manual
for certain restrictions when using
the TE903 and/or TE903NP
unit(s) outdoors.
Stainless Steel Faceplate Telephone Entry Systems
Alpha Communications® Stainless Steel Faceplate Telephone Entry Systems are designed for
easy operation and are available in models with a number capacity of 1 - 750 units (7
digits/10 digits/11 digits). Units can be used as standard 'dialer' type or 'nophone-bill type (with
additional equipment). Both models are standard in an open-voice (loudspeaking) configuration.
Features
Can be used with either rotary or touch-tone service
Memory retention during power failure (EEPROM)
Vandal/weather resistant construction (Stainless Steel)
Keyless entry code
Door timer cut-off - Voice mail compatible
Built-in Weigand interface to card access system
Postal Lock Release provision
Multiple entrance capability (add only additional lobby panels up to 20 entrance stations)
Secondary relay output
Lexan® Polycarbonate Directory Window
Specifications
Dimensions:
11.0"W x 16.0"H x 3.65"D
(280mm x 407mm x 93mm)
Construction:
16 gauge stainless steel faceplate with Black painted enclosure and
Rain Hood
Power Required: 110 VAC for SS106 Transformer(s)
Mounting:
Surface (standard) - may be Flush mounted with optional model TR903
Stainless Steel Flush Trim frame
Typical System Components
TE903
Telephone Entry Master (stainless steel with Black painted enclosure and rain hood
with built-in 100 name directory
TE903NP
Same as TE903 Master but also includes the 'No Phone Bill' software required for
that application. This master requires additional 'No Phone Bill' components.
SS106
Transformer (1 required to power the TE903 or TE903NP. A separate transformer is
required to power the door opener).