Data Sheet

Product Specification Sheet APS829 - Rev. 10/2013
TE904/TE904NP Surface Mount Telephone Entry Master Stations
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Lexan is a registered trademark of G.E. Corp
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS828) Next (APS830) >
TE904 (standard 'Dialer' type) & TE904NP (No-Phone-Bill'
type)
Architects' And Engineers'
Specifications
Alpha Communications® surface mount Series
Telephone Entry System is a complete automatic
call and entry control system. The system
operates on a standard dedicated telephone line
and 110 VAC with 16 VAC transformer.
All faceplates shall be constructed of 16 gauge
stainless steel and shall include a zinc die-cast
marine quality keypad, speaker/microphone,
postal release option, and an RJ Plug Connector.
The TE904 Series allows for 1 - 750 apartment
capacity (with 7/10/11 digit dialing capabilities).
Both the TE904 and TE904NP models shall
include an integral 200 name directory with a
Lexan® Window, although more than 200 names
may be possible if a smaller font is used.
NOTE: See installation/use manual for
certain restrictions when using the TE904
and/or TE904NP unit(s) outdoors.
TE904 Series Stainless Steel Telephone Entry Systems
Alpha Communications® Stainless Steel Faceplate Telephone Entry Systems are
designed for easy operation and are available in models with a number capacity of 1
- 750 units (7 digits/10 digits/11 digits). Units can be used as standard 'dialer' type
or 'no-phone-bill' type (with additional equipment). Both models are standard in an
open voice (loudspeaking) configuration.
Features
Can be used with either rotary or touch-tone service
Memory retention during power failure (EEPROM)
Vandal/weather resistant construction (Stainless Steel)
Keyless entry code
Door timer cut-off - Voice mail compatible
Built-in Weigand interface to card access system
Postal Lock Release provision
Multiple entrance capability (add only additional lobby panels up to 20 entrance
stations)
Secondary relay output
Lexan® Polycarbonate Directory Window
Specifications
Dimensions: 19.0"W x 13.0"H x 3.75"D (483mm x 331mm x 96mm)
Construction:
16 gauge stainless steel faceplate with Black painted enclosure
and Rain Hood
Power Required: 110 VAC for SS106 Transformer(s)
Mounting:
Surface (standard) - may be Flush mounted with optional
model TR904 Stainless Steel Flush Trim frame
Typical System Components
TE904:
Telephone Entry Master (stainless steel with Black painted
enclosure and rain hood with built-in 200 name directory
TE904NP:
Same as TE904 Master but also includes the 'No Phone Bill'
software required for that application. This master requires
additional 'No Phone Bill' components.
SS106:
110 VAC Transformer. 1 required to power the TE904 or
TE904NP. A separate transformer is required to power the
electric door strike.