Data Sheet

Product Specification Sheet APS583 - Rev. 07/2013
VBV-4 'NoCoax' Video Distributor Unit (VH30ANC and VH30CNC Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS582) Next (APS584) >
Architects' And Engineers'
Specifications
The video data distributor unit(s) shall be
Alpha Communications® / S.T.R.™ model VBV-4,
or approved equal, and shall provide up to four
(4) amplified video data outputs for the
'NoCoax' video-intercom system. The VBV-4 shall
be built into a rugged high impact ABS plastic
case, and shall be powered by the model NG20
DC power supply.
Low voltage wiring shall be used and
positive screw terminal connectors shall be
provided for installation wiring. The VBV-4 shall
be mountable right to the surface of the wall or
in a customer supplied junction box cabinet.
Contractor shall observe all local and national
electrical and building codes.
VBV-4 'NoCoax' Video Distributor Unit
The Alpha Communications® / S.T.R.™ VBV-4 video distributor unit is used only with
the VH30ANC and VH30CNC series 'NoCoax' video-intercom systems. The VBV-4 is
used when the video data signal from the lobby entry camera(s) must be split
(distributed) to several cables.
The VBV-4 gets its power from the NG20 DC power supply. All VBV-4 connections are
positive screw terminal type.
Each VBV-4 has four (4) video data outputs. When multiple VBV-4's are used, for
systems requiring more than four (4) outputs, multiple VBV-4 units may be "daisy-
chained" to provide outputs in multiples of four (4).
Features
Easily Installs Right on Finished Wall Surface or in Optional Junction Box
Operates on Safe Low-Voltage Class II Wiring
Positive Screw Terminal Connectors
Provides 4 separate amplified video data outputs
Can be "daisy-chained" when more than 4 video outputs are needed
Specifications
Dimensions:
Height: 3.75" (96mm)
Width: 4.25" (108mm)
Depth: 2.375" (61mm) from mounting surface
Construction: High impact Black ABS plastic case
Connections: Positive screw terminal connectors
Temerature
Range:
0-50 degrees C.
Mounting:
Surface-mounted (usually installed near the system amplifier/power
supply and other system central equipment).