Data Sheet

Product Specification Sheet APS864 - Rev. 11/2013
VI644S V.I.P.™ Series Stainless Steel Economy Style Lobby Panels
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS863) Next (APS865) >
VI644S06
6 Butto n Surfa ce Pa ne l
Architects' And Engineers'
Specifications
The entry panel unit(s) shall be Alpha
Communications® VI644S V.I.P.™ series,
or approved equal. Panel(s) shall be
surface mount type. Panel(s) shall include
a 45-ohm mylar loudspeaker. Panel(s)
shall have solid-metal push-buttons,
matching stainless steel resident name
holder slots, and mesh speaker grille to
protect the speaker components. Panel
shall be made of a single sheet of 16
gauge high carbon stainless steel.
Surface VI644S panels shall be made with
1.375" (35mm) side return bends and
open in the back. A 'Star'
head screwdriver tip shall be provided
with each panel for installation / removal
and maintenance of the name holders.
VI644S V.I.P.™ Series Economy Stainless Steel Lobby Panels
The Alpha Communications® VI644S V.I.P.™ series surface mount Stainless Steel (Vandal-
Resistant) lobby panels are rugged, good-looking panels for indoor or outdoor use, and are
our lowest cost Stainless Steel panels, with matching stainless steel name holders, made in
stock configurations, for 2 to 12 push buttons.
Made of heavy 16 gauge high-carbon stainless steel, the VI644S series is made to take
abuse. VI644S panels are made in 'stock' sizes, and are available in several surface mount
styles. These surface VI644S panels are made with 1.375" (35mm) side return bends and
are open in the back, and include a 'C' type galvanized steel wall mounting bracket.
All VI644S panels feature solid metal push-buttons and matching stainless steel resident
name holder slots. The use of 'Star' head screws makes it nearly impossible to tamper with
the panel without the use of the special screwdriver tool.
All VI644S surface panels are a compact 4.25" wide (108mm) and are available in
2,3,4,6,8,10 or 12 button versions. Models with 2 thru 8 push buttons are 13.00" high
(331mm) and model with 10 or 12 buttons are 16.00" high (407mm). Because of the low-
cost 'stock' nature of these panels, they are not available in custom sizes or configurations,
with custom engraving, building name/address engraving or alphabetical directories. For
custom configurations or special Stainless Steel panel requirements, we suggest our VI402
(custom) V.I.P.™ series panels.
Features
Our LOWEST COST Stocked Surface Stainless Steel Panels!
Heavy 16 Gauge High-Carbon Stainless Steel Faceplate
Solid Metal Pushbuttons with Permanent Engravings
Panels are available in several Surface Mount configurations
Rugged, Good-Looking and Vandal-Resistant
Works with a variety of apartment intercom stations
Tamper-Resistant 'Star' Head Screws Used
Specifications
Dimensions:
WIDTH: Surface; 4.25" (108mm).
HEIGHT: 2 thru 8 push buttons 13.00" (331mm), 10 or 12 push
buttons 16.00"h (407mm).
Construction: Heavy 16 Gauge High-Carbon Stainless Steel faceplate.
Tool Required:
'Star' head screwdriver tip required for panel
installation/removal, and name holder maintenance, included
with each VI644 V.I.P.™ panel ordered.