Data Sheet

Product Specification Sheet APS010 - Rev. 09/2013
V.I.P. Series Stainless Steel Directory Units
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS009) Next (APS011) >
VIP056D Stainless Steel (Shown)
Architects' And Engineers'
Specifications
The alphabetical directory unit(s) shall be
Alpha Communications® Model VIP0XXD
(for 06,10, 22, 32, 36, 44, 56 or 72
names), or approved equal, and shall be
mounted right on the surface of the wall.
Contractor shall fasten the directory
unit(s) securely to the wall. No back box
shall be required. Directory unit(s) shall
be made of heavy-gauge brushed
stainless steel (or polished brass-add
suffix 'BR), with the name strips protected
by a sheet of clear Polycarbonate. Name
insertion and maintenance shall require
the use of a 'Star' head type screwdriver
tool. Contractor shall provide one (1)
screwdriver tool (per building), to the
building management (or superintendent),
for future directory name maintenance.
Directory shall have an extruded aluminum
track to hold the engraved (model TDS)
name strips. Extruded directory strip track
shall have a 'stop' at the bottom to
prevent name strips from falling out, once
directory is secured to the wall.
VIP™ Series Stainless Steel and Brass Directory Units
The Alpha Communications® VIP™ Serie s Stainless Ste el (Vandal-Resistant) directory units a re
de signed to mount right on the surfa ce of the w a ll. The y are also a vailable in a solid
Po lished Bra ss finish (add suffix 'BR' to model number). Made of heavy-gauge brushed stainless
steel (or polished brass), the (VIP0XXD) VIP™ directories hold up to 10, 22, 32, 36, 44, 56
or 72 engraved (or blank) directory strips, protected by a polycarbonate window. For
installations requiring more than 72 names, simply mount additional directory units side-by-
side (or order custom-size directory units).
Installation is quick, easy, attractive and requires no back box. Name insertion and
maintenance requires the use of a 'Star' type screwdriver tip. The use of 'Star' head screws
makes it nearly impossible to open the directory without the use of the special tool
(included with each directory unit).
The engraved strips are held in place by an extruded aluminum track, with a 'stop' on the
bottom to prevent names from falling out, once installed onto the wall. The VIP™ directory
units can be used in conjunction with lobby entry intercom panels, or as a stand-alone
directory installation.
Features
Heavy Gauge Brushed Stainless Steel (or solid Brass) Faceplate
Easy Installation--Mounts Right on Surface of the Wall
6, 10, 22, 32, 36, 44, 56 and 72-Name Capacity Models Available (other sizes
available on special-order)
Names are Protected by a Thick Polycarbonate Window
Rugged and Good-Looking. Vandal- Resistant
Works with a variety of apartment intercom and videointercom entry panels
Tamper-Resistant 'Star' Head Screws Used for St. Steel units
Includes Special 'Star' Screwdriver Tip for Name Access
Models Available*
VIP006D: 6-Name Capacity. 3.50"H (89mm)
VIP010D: 10-Name Capacity. 4.50"H (115mm)
VIP022D: 22-Name Capacity. 7.50"H (191mm)
VIP032D: 32-Name Capacity. 10.50"H (267mm)
VIP036D: 36-Name Capacity. 11.50"H (293mm)
VIP044D: 44-Name Capacity. 13.50"H (343mm)
VIP056D: 56-Name Capacity. 16.50"H (420mm)
VIP072D: 72-Name Capacity. 21.00"H (534mm)
* All models above are 4.25"W (108mm) x 0.38"D (10mm).