User manual

Chapter 5 Parameter Introductions
P3.01 Multi-function input selection Terminal X1
Range: 0～53【1】
P3.02 Multi-function input selection Terminal X2
Range: 0～53【2】
P3.03 Multi-function input selection Terminal X3
Range: 0～53【37】
P3.04 Multi-function input selection Terminal X4
Range: 0～53【26】
P3.05 Multi-function input selection Terminal X5
Range: 0～53【27】
P3.06 Multi-function input selection Terminal X6
Range: 0～53【28】
P3.07 Multi-function input selection Terminal X7
Range: 0～57【0】
P3.08 Multi-function input selection Terminal X8
Range: 0～57【0】
Note:
◆For models which power is equal or below 3004GB, function code P3.06 ~ P3.08
can not be modified; but P3.04, P3.05 (X4, X5 terminal) will function as P3.07,
P3.08 (X7, X8 terminal) correspondingly, the setting range is from 0 to 57;
◆Control terminals X1~X8 are multi-function terminals. They can be defined by preset
P3.01~P3.08, which are allowed function redefined. The redefined function terminal,
if one of them is valid, the function is effective. For the details of settings and
functions of P3.01~P3.08, refer to Table 5-3-1.
Table 5-3-1 Multifunction input selection
Setting Function Setting Function
NULL: No defined 1 FWD: Running Forward 0
REV: Running Reverse 3 RUN 2
F/R: Running direction 5 HLD: self-hold selection 4
RST: reset 7 FC: Setting frequency selection 6
FJOG: JOG FWD 9 RJOG: JOG REV 8
UP 11 DOWN 10
UP/DOWN Reset 13 FRE: Coast-to-stop 12
Forced outage (according to
Dec time4)
15 DC injection braking 14
Acc/Dec prohibit 17 Inverter running prohibit 16
S1 Multi-step Speed 1 19 S2 Multi-step Speed 2 18
S3 Multi-step Speed 3 21 S4 Multi-step Speed 4 20
S5 Multi-step Speed 5 23 S6 Multi-step Speed 6 22
24 S7 Multi-step Speed 7 25
Command channel switch to
Terminal control 2
125