User manual

Chapter 5 Parameter Introductions
Range: Min Pulse value output of
DO~50.00kHz【10.00kHz】
P4.24 Max output frequency of DO
Range: 0.00~Max Pulse value output of
【0.00kHz】
P4.25 Min output frequency of DO
5.6 PLC Operating (Group P5)
P5.00 PLC Operating mode
Range: 0~2【2】
0: Single cycle 1 1: Single cycle 2 (holding the final
value)
2: Continuous operation
Note:
◆Single cycle 1
The inverter stops automatically after one cycle of operation and will start when
receiving RUN command again. As shown in Fig. 5-5-1.
T1 T2 T3 T4 T5 T6 T7
Run command
f1
f2
f3
f4
f5
f6
f7
Operation Freq.(Hz)
Time
Fig. 5-5-1 Stop mode after single cycle of PLC
◆Single cycle 2 (holding the final value)
The inverter will hold the operating frequency and direction of last step after
completing one cycle of operation. As shown in Fig. 5-5-2.
147