User manual

Chapter 5 Parameter Introductions
saved to EEPROM directly. However, if Pb.06 is set as 0, the modified parameters will
not be saved to EEPROM, but stored in RAM and they will be lost when power is off.
The other method to save the data to EEPROM is that write the MODBUS address
corresponding to the modified parameter to 0x00FF,then the data will be saved to
EEPROM which acts as the “ENTER “key to save the data.
Write or erase EEPROM frequently will reduce the life of EEPROM. Write
parameter data and save the data to EEPROM frequently in communication mode is
not allowed; for writing data frequently, you must modify Pb.06 as 0.
Pb.07 CCF6 Fault Handling
Range:0,1【0】
0:Not generate fault and keep on
running
1:Generate fault and stop
Note:
This function code is used to decide whether to generate communication fault or not.
When the value is 1, if communication fault occurs, the keyboard will display CCF6
and the inverter stop as fault occurs; when the value is 0, it doesn't generate the fault
and the inverter will keep on running.
5.13 Display Control (Group PC)
Range: 0,1【0】
PC.00 LCD Language selection
0: Chinese, display Chinese prompt in LCD screen;
1: English, display English prompt in LCD screen.
Note:
◆PC.00 is effective for the panel with LCD screen. And the LED panel only displays
segment code of characters and digits.
Note: Only 35R5GB/37R5PB and above inverter models can be equipped with the
LCD keypad
Range: 0,1【1】
PC.01 Output frequency (Hz) (Before compensation)
Range: 0,1【0】
PC.02 Output frequency (Hz) (Actual)
1: Display
0: No display
Note:
◆If PC.01 is set to 1, output frequency (before compensation) will be displayed with
unit “Hz” in monitoring state, and the unit indicator “Hz” will be lit up. If it is set to 0,
the object will not be displayed.
◆If PC.02 is set to 1, output frequency (actual)will be displayed with unit “Hz” in
monitoring state, and the unit indicator “Hz” will be lit up. If it is set to 0, it will not be
displayed.
PC.03 Output current (A)
Range: 0,1【1】
0: No display 1: Display
Note:
168