User manual

Chapter 3 Operation
42
Table 3-2 Description of keystroke function
key Name of key Key functions
PRG
ESC
Programming
key/Escape key
Go to programming state or escape from
programming state. When in the monitoring state,
By pressing the PRG/ESC key, the keyboard will
switch from the monitoring state to programming
state. In addition, it will firstly go to the function
group menu, and then if the user press the
“ENTER”key, it will go to the function code menu,
and then go to the function parameter menu if press
the “ENTER”key again.
When in the function parameter menu, press the
“PRG/ESC” key, the keyboard will switch to the
function code menu, and then to the function group
menu, and then to the monitoring state.
When in fault state, press the “PRG/ESC” key, the
keyboard will switch from fault code display to the
function group menu. The same function is to
warning state.
ENTER
Enter key
Go to the next menu in programming state.
Save the parameter set value when in the function
parameter menu.
Digital
Encoder
-
+
Increment key
(Turn right)
+
In programming state, number change keys changes
parameter group and parameter numbers or set
values. When in the function parameter menu, the
changeable number will blink. Press increment key,
the number will increase.
In monitoring state, if the frequency setting mode
by keyboard is effective. Turn right this key; it will
increase the setting frequency directly. And this
function is applied to the PID speed feed and PID
analog feed.
Decrement key
(Turn left)
-
The same function as Increment key, but the
number will decrease instead of increase.