Alphacom a200 a RANGE telePHONE USER GUIDE Versatility & Value 1
CONTENTS Page 1. GUARANTEE 2. CONDITIONS OF USE 3. facilities and features 2 2 3 4 5 6 6 6 7 7 7 7 8 8 8 8 8 9 9 9 9 9 9 10 10 11 4. LOCATIONS OF CONTROLS 5. UTILISATION OF CONTROLS 6. INSTALLATION 7. SETTING THE DIALLING AND RECALL MODE 7.1 THE DIAL MODE SELECTOR SWITCH 7.2 THE RECALL MODE SELECTOR SWITCH 73 the message waiting selector switch 74 setting the ringer - ringer volume slide control 75 connecting to telephone socket 8. Operating procedures 8.1 last number redial 8.
1. GUARANTEE Your a200 Telephone is guaranteed from the date of purchase. If found to be faulty within the guarantee period it will be repaired or replaced at our discretion, subject to our standard terms and conditions. The guarantee does not cover accidental damage or negligence. The telephone must only be used in the U.K. in accordance with its instructions for use and must not be tampered with, or taken apart by anyone who is not an authorised representative of the company.
3.
4.
5. Utilisation of Controls The button functions are as follows: 0-9 - Dialing digits. *-# - Dialling codes for MF signalling Recall - For use on PBX or for star services LNR - Last number redial function Tone - Switches from Loop Disconnect to DTMF during dialling Pause - Insert a pause in the dial sequence Mute To prevent the other party from hearing you (ie. push (on handset) down to mute) or, alternatively, on specially adapted models this can be amended to push-to-speak.
6. Installation Your a200 Telephone is designed to be plugged into the new phone sockets adopted in the U.K. If you do not have a primary socket you can obtain this from your BT sales office, whose address is in the telephone directory. Additional sockets can be fitted by yourself using one of the extension kits commercially available. For additional sockets required on a PBX you should contact your PBX supplier/maintainer.
7.2 the recall mode selector switch If you are connected to a TONE dialling exchange, set the switch to the TBR (Timed Break Recall) position to enable you access certain Network Services. If you are connected to a PULSE dialling exchange, set the switch to the ELR (Earth Loop) position as recall has no function on direct lines connected to such exchanges. (This will avoid the possibility of cutting off your call should the recall button be pressed accidentally.
8. Operating Procedures 8.1 Last Number redial To redial the last number manually dialled: - Lift handset, listen for dial tone - Press redial button 8.2 memory operation Up to 19 telephone numbers each consisting of a maximum of 24 digits (including pauses or change of dial mode instruction) may be stored in memory. Numbers may also be stored when you are actually in the process of making a call and using the handset or headset.
8.5 tone button Pressing the tone button during dialling when set to loop disconnect (Pulse), switches the signalling to DTMF (tone). This facility may be used when the call is routed via multiple exchanges, including PBX where the first exchange responds to Pulse dialling only whilst the distant exchange to Tone. Whilst the Dialling switch is set to Pulse, the telephone will reset to Pulse when the handset is replaced back on hook 8.
10. In Case of Difficulty If your telephone does not appear to be working, the following simple instructions should enable you to discover the problem. You may wish to ask a friend to help you by making and receiving calls from your line to theirs. - Check that all the handsets have been correctly replaced and the telephone is firmly plugged into the socket. Attempt a call. If the problem persists proceed through the following steps and attempt to make a call at each stage.
. Wall Mounting You may wish to mount the NR202 Memoryphone on a wall. To do this: - Slide the plastic “wall mount” upwards to remove, turn it around and replace it in the slot. - The Handset will then stay in the cradle when the telephone is on the wall. - Position two screws into the wall at a distance of 10cm apart. - Ensure that the screw heads are 5mm for the wall. - Place the telephone on the screws using the keyhole slots on the rear of the telephone.
Distributed by: Alphacom® Incom House, Waterside Trafford Park Manchester, M17 1WD Tel: 0161 935 1000 Fax: 0161 935 1015 www.alphacomtelecoms.co.uk email: sales@alphacomtelecoms.co.