User manual

M ATHF ACTS IN A FLASH SMARTA PPLET
How Students Do MathFacts in a Flash Work on NEO 2
5-6
. . . . .
User Manual
• If you don’t see any answer choices, type your answer and press
enter.
9. After you finish the practice or test, the screen will show you how you did.
A TOPS Report may also be sent to the default printer for your teacher’s
computer. Follow the instructions for the screen you see:
• If the screen asks you whether to move on to the next level, start a
practice, or test at a new time goal, press Y for yes or N for no; then,
press enter.
• If the screen shows your score but does not give you any choices,
press enter after you read the information. After you do this, you may
be shown a list of options. If the screen gives you a list of choices,
press
 to highlight the choice you want; then, press enter.
10. When the screen shows you that the session has been completed, press
applets to close the MathFacts in a Flash SmartApplet.
Tips for Practices and Tests:
• During practices, if you enter an incorrect answer, the program will put
an X over it and a box around the correct answer. Then, it will give you
the chance to choose the correct answer again.
• During tests, you can press esc or back space to go back one question.
• If the time limit is almost up for the problem, practice, or test, a clock
will flash in the middle of the black bar at the top of the screen. If you
run out of time for the practice or test, the program will let you know.
• To stop a practice or test, press ctrl-A or cmd-A. If the NEO 2 asks for a
monitor password, your teacher must enter the MathFacts in a Flash
monitor password.
The MathFacts in a
Flash TOPS Report
Preference setting
determines whether the report
is sent to the printer
automatically.