ALPHASONIK R Owner's Manual 10” Amplified Vented Bass Enclosure PBAT10E
S E T T I N G T H E P A C E S I N C E 1 9 7 6 ALPHASONIK WAS FOUNDED IN 1976 WITH ONE MISSION, TO BRING STATE OF THE ART PERFORMANCE TO THE CAR AUDIO ENTHUSIAST. In those early years we pioneered such ground-breaking technologies as amplifier fan cooling and high voltage signal transfer which remain a benchmark in high-end audio. Today, the new Alphasonik is committed to pushing the envelope with regard to technology, quality and value.
Introduction.................................................................................3 Features and Specifications........................................................4 Choosing a location.....................................................................5 Installation..............................................................................6 - 7 Troubleshooting..........................................................................8 Warning / Disclaimer...................................
I N T R O D U C T I O N Thank you for purchasing this Alphasonik product. Alphasonik products are specifically engineered and designed for the mobile audio environment. This manual contains important information about installation, set-up procedures and integrating your new Alphasonik product into your vehicle. With proper care and installation, your new product will provide you with many years of high performance listening enjoyment.
PBAT10E: 10” Amplified Vented Bass Enclosure High Quality Constructiion Rear Facing Tuned Port Black leather Cover MOSFET Amplifier Remote Bass Control Knob Low Level and High Level Inputs Adjustable Low Pass Filter: 40Hz - 250Hz Adjustable Bass Boost 0 - 18dB 10” Woofer w/ Mineral - Filled Composite Cone F E A T U R E S & S P E C I F I C A T I O N S 100 Watts RMS Frequency Response of 31Hz - 150Hz Bumped Back Plate Extended & Vented Pole Piece Complete Mounting Hardware & Amp Installation Kit Dimensions:
C H O O S I N G A L O C A T I O N It is always best to plan the complete installation prior to attempting to install any product. The routing of wires, power connections and mounting locations should be planned first. As with any car stereo installation, all work performed should be checked thoroughly and carefully prior to the operation of the system. The placement of your Alphasonik enclosure within your vehicle will greatly affect the overall performance of your audio system.
Before starting your installation we recommend to disconnect the battery so there can be no damage done to the electrical system of the vehicle. Before disconnecting the battery make sure that the vehicles source unit does not have a password and if so you have the password in hand to disable the security feature of the source unit. Make sure your source unit (Cassette, CD, DAT, DVD, etc) is turned off while connecting the terminals. Turn on the various components and slowly advance the volume.
I N S T A L L A T I O N C O N T I N U E D L HI-IN R REM L PROT GAIN L.P.
In the event that your Alphasonik speakers appear to require service, we ask that you first do a little troubleshooting to determine if the problem is actually the speaker or a problem located in a different part of the vehicle such as the amplifier, wiring, fusing or possibly the source unit. If your Alphasonik speakers have been installed professionally by an Authorized Alphasonik Dealer, we recommend that you return to the Dealer and demonstrate the problem to a qualified installer or repair technician.
I N S T A L L A T I O N C O N T I N U E D Investigate the layout of your vehicle thoroughly before drilling or cutting. Take care when you work near the gas tank, gas lines, hydraulic lines, electrical components and electrical wiring. Do not use the equipment unmounted. Attach this system securely to prevent damage, particularly in the event of an accident or aggressive driving. Do not mount the system so that wire connections are unprotected or are subjected to pinching or damage from nearby objects.
Alphasonik, Inc. warrants this product against all defects in material and workmanship for a period of one (1) year from the date of original purchase provided it was purchased from an Authorized Alphasonik, Inc. Dealer. The conditions of this warranty and the extent of the responsibility of Alphasonik, Inc. under this warranty are as follows: W A R R A N T Y 1. DATED PROOF OF PURCHASE IS REQUIRED FOR WARRANTY SERVICE OF THIS PRODUCT. Information about Alphasonik, Inc.
W A R R A N T Y C O N T I N U E D 7. This warranty is not transferable and protects the original purchaser provided they reside and made their purchase in the United States. International consumers may contact their local retailer or distributor for warranty information. 8. ALL IMPLIED WARRANTIES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES SHALL ALPHASONIK INC.
N O T E S 12
N O T E S 13
N O T E S 14
ALPHASONIK INC. 7050 VILLAGE DR. BLDG. G BUENA PARK, CA. 90621 TEL: (714)670-8950 FAX: (714)670-8959 www.alphasonikinc.
