Installation guide

IPDP - installation and operating instructions

Picture 2 The real image of connection and set-up elements

1. PoE module – the Fermax IP DP panel is equipped by a circuit supplying

the power over UTP cable – PoE. If your network switch is equipped by

PoE, or if you have got a PoE power supply (a box in the size of a power

supply adapter inserted into the input of the UTP cable), then for the

correct function of the door phone panel you do not need an external

power supply of 12V. If you use an electrical lock for opening the door,

then you need to use an external power supply adapter (only in the circuit

with relay contacts). You can also use a lower power consumption

electrical lock. In this case please use the connector on IPNCmod 12V.

When the door phone panel is PoE powered, there is 12V/350mA

available.

2. Yellow LED – signallisation of active power supply

3. Yellow LED – data activity on the network connection (continuous light

during data transmission)

4. Green LED – network connection (Ethernet) – continuous light in case the

UTP cable is connected correctly.

5. Loudspaker loudness SPK – by the trimmer you can set a desired

loudness of the loudspeaker. In case you need to further increase the