Installation guide

IPDP - installation and operating instructions
4
1 Basic description
1.1 Features
 IP (SIP) modular system with built-in colour camera
 P2P or SIP proxy mode (PBX network system)
 1-64 pushbuttons
 Two 25-digit numbers on each pushbutton
 Waterproof pushbuttons with impregnation IP66, gold plated contacts
 Pushbuttons are manufactured in zamak and a natural chromed finish
 Panel is made of highly weather resistant anodized aluminium
 Easy installation for outdoor or indoor use
 Pernament card slot lighting
 Card slot lighting by low consumption, max. duration LEDs
 2 relays for two independent electrical locks
 Codelock feature by using pushbuttons
 Up to six codelock numerical passwords (2-6 digits)
 Basic panel set is supplied in 2 pushbutton version with colour camera
and surface mount installation box (ref. 1CP201 + ref. F7061)
 Basic panel ref. 1CP201 contains the first expansion module for 8
pushbuttons
 Power supply 12V or PoE (Power over Ethernet)
 PoE allows using a low consumption el. lock
 PopUp SW for on-line monitoring of door entrance, possiblity to open
el. locks via PC
 WEB based programming
 Integrated heating of the electronic circuit board
 OS Linux 2.6
 USB connection of integrated camera – USB Guest 1.1
 Software GSPCA for video transmission to web browser in PC –
W3CAM (J-PEG, RTSP stream) and stream H.263
 Flush or surface mounting
 Automatic illumination for camera by white LEDs