Installation guide

IPDP - installation and operating instructions

1.3 Assembly of panels

The building blocks of Fermax IP DP are the basic panels which differ by

its size, number of pushbuttons, if the visit card has got two or one

pushbuttons.

1.3.1 Terminology and orientation in panels

4 CP 204 (item number) as a representative of terminology. It is a panel with

height of 199mm. It contains an audio module, a colour camera and two times

4 pushbuttons, i.e. 8 pushbuttons in total.

first digit: 1 - 9 defines the height of the whole panel, the width of all panels is

130mm.

1 - 128mm

2 - 151mm

3 - 175mm

4 - 199mm

5 - 246mm

6 - 294mm

7 - 341mm

8 - 389mm

9 - 436mm

group of letters: defines basic HW features of panel :

A - audio panel

C - audio panel with a camera

P – panel with pushbuttons

V – panel with a window

W- panel with two windows

first digit after letters: 1 / 2 – defines number of pushbuttons at visit card

1 (on the right) or 2 (on the left or right)

next two digits: 01 - 15 – number of visit cards. If multiplied by the

previous digit, then we get a number of pushbuttons on

the panel

By this marking one compact panel is defined. The panel can be expanded by

other panels vertically or more optimally, in a horizontal direction. In case of

horizontal expansion, then it is necessary to use the same height of panels

(defined by the first digit of the item number).