Installation guide

Welcome
Congratulations on purchasing the door phone panel “Fermax PBX Door
Phone” Fermax PBX DP. This door phone can satisfy your need of
communication with visitors at the entrance to the building, to your company or
at the entrance of your house. Its use is universal, because it can be connected
to an analog internal extension line of your PBX regardless on its type or on the
producer. To each pushbutton you can program up to two 16-digit numbers in
pulse or tone dialling incl. characters “*”, “ # ”, Pause and Flash in tone dialling.
The basic module of the door phone always contains 2 pushbuttons and
optionally the first expansion, 8 pushbutton C module. The combination of
Fermax New Cityline panels enable the sets of door phone with 1 to 10
pushbuttons just by using the basic electronics module of Fermax PBX DP.
You can also expand the whole system by the 8 pushbutton expansion module
Fermax PBX EXP up to the limit of 64 pushbuttons. The basic module can be
expanded by Fermax PBX CAM, a module with IP colour camera, optionally
there can be an add-on speaker module with an amplifier Fermax PBX EA,
which is used for very noisy areas. The Fermax New Cityline panels are rich
with an add ons. For example the panels offer installations on the surface or
flush mounted, they can be used both indoors and outdoors, there can be add-
on roofing used, etc.
The door phone panel is powered from the analog line of the PBX. The
features of the door phone are similar to a hands-free telephone. Among basic
features you can find the possibility of opening up to two doors via connected
electrical locks (first 10 pushbuttons can be used for code lock function –
opening the door via a pre-set code). Easy programming via serial line or USB
from the computer, alternatively via tone dialling of a telephone. If programming
via tone dialling, you can either ether the programming mode by calling to the
door phone panel and enter the 4-digit service password or by connecting of
programming jumper on the main board of the door phone panel. The second
type of programming is used usually when you forget the service password.