Installation guide

1.2 Assembly of panels
The building blocks of Fermax IP DP are the basic panels which differ by
its size, number of pushbuttons, if the visit card has got two or one
pushbuttons.
1.2.1 Terminology and orientation in panels
4 AP 204 (item number) as a representative of terminology. It is a panel with
height of 199mm. It contains an audio module and two times 4 pushbuttons, i.e.
8 pushbuttons in total.
first digit: 1 - 9 defines the height of the whole panel, the width of all panels is
130mm.
1 - 128mm
2 - 151mm
3 - 175mm
4 - 199mm
5 - 246mm
6 - 294mm
7 - 341mm
8 - 389mm
9 - 436mm
group of letters: defines basic HW features of panel :
A - audio panel
C - audio panel with a camera
P – panel with pushbuttons
V – panel with a window
W- panel with two windows
first digit after letters: 1 / 2 – defines number of pushbuttons at visit card
1 (on the right) or 2 (on the left or right)
next two digits: 01 - 15 – number of visit cards. If multiplied by the
previous digit, then we get a number of pushbuttons on
the panel
By this marking one compact panel is defined. The panel can be expanded by
other panels vertically or more optimally, in a horizontal direction. In case of
horizontal expansion, then it is necessary to use the same height of panels
(defined by the first digit of the item number).