User manual

14|Page
parameters, the System will trip the appropriate relay (if it is set in modes m=1 to m=5) for a
given time, previously set in parameters.
2.3 Person(s) Inside the Building
‘Person(s) inside the building’ means anyone who is in telephone contact with the Door
Entry System.
2.3.1 Outbound Calls
An ‘outbound call’ is any call from the door entry System (i.e. from a visitor). When the
phone rings and is pick-up it will be possible to speak with the visitor at the door, by
choosing one of the modes (m=1 to m=5, Day/Night mode, hang up etc). 10 seconds into
any conversation the system will issue an end of call alert, by choosing ‘*/#’ it is possible to
prolong the call; the call will then be ended by hanging up.
There are two ways for information to be transmitted (door lock opening, Day/Night modes,
prolonging the call, command for hang-up etc); either by “RTP channel” or by “SIP info”, the
variant “in-band DTMF” isn’t available in this Door Entry System.
2.3.2 Incoming Calls
An ‘incoming call’ is call from the System (i.e. from a visitor). After selecting the number of
the branch or IP address where the system is connected, the System rings (and the LED
light will flash). After set number of rings the system will automatically pick up the call and it
is then possible for the visitor to speak. Otherwise the options are the same as with the
outbound calls.