User manual

21|Page
 You can run several Door Entry Systems in one network and the different Door Entry
Systems can be differentiated with a “nametag” (see page 17), the name can be
shown in the header of Pop-Up program.
Video parameters are explained on page 29.
3.1.8 Day Intervals
Only displays if the automatic Day/Night relay is ticked on the basic parameters page.
Available only for firmware version V2.8 and higher.
1. Actual time – clock is set in “service – time server”
2. Interval table for Day, any other time mode is set to Night. E.g. if Interval 1 = 08:00-
12:00 and Interval 2 = 14:00-17:00, then from midnight until 7:59 is Night, from 8 am
until 12 am is Day, from 12:01 until 13:59 is Night, from 2pm until 5pm is Day and the
rest until midnight is Night.
3. Default values – will perform basic factory reset.
After making changes click on “save changes”.
3.1.9 User Interface