User manual

28|Page
3.2.4 Direct Dialling – Memory Numbers
1. Button number (Memory) – saved telephone numbers in column 1 (Day Mode) can be
as long as 25 digits. If P2P mode is in use then the IP address will need to be saved
in the following format 192*168*1*231*, where “*” means “.”. If the SIP server mode is
in use then save telephone numbers i.e. 117.
2. Button number (Memory) – saved telephone numbers in column 2 (Night Mode) can
be as long as 16 digits. If P2P mode is in use then the IP address will need to be
saved in the following format 192*168*1*231*, where “*” means “.”. If the SIP server
mode is in use then save telephone numbers i.e. 117.
Note: telephone numbers in P2P mode can be saved in the following format
123456#192*168*1*231
Note: The switchover from the Day to Night mode stays set even after a power cut.
3. Default values - – pressing this button will perform a basic factory reset.
After making changes click on “save changes”.