User manual

7|Page
with the PoE system, as there sufficient power available in this system to accommodate this
(please see picture 4).
Picture 1 Motherboard
The connection of relay contact terminals is illustrated on picture 2. The “NO” annotation
means an idle-disconnected contact, “COM” means a pin contact (middle) and “NC” means
an idle-connected contact. The contacts of both connectors are galvanic insulated from
each other and also from other circuit contacts.
The alternative connections are shown on picture 3 and 4.
The camera can be tilted vertically (up and down) so that the optimal picture can be
achieved.