Quick Start Guide

32 33
ENGLISH
17. MUTE (To switch the sound on or off.)
18. RETURN (To return to the previously selected program
number.)
19. EXIT (To exit the menu.)
20.
|
AND ENTER (Use to select on screen menu
items and change menu values.)
21. FAV+/FAV- (To select a favorite channel according to the
service sequence in current favorite list.
22. EPG (To start the EPG application.)
23. VOL+/VOL- (To adjust the audio levels.)
24. OPEN/CLOSE (Press to open or close the disctray.)
25. MEDIA2 (Once button recording.)*
26. D.TITLE (During DVD playback, press to display the DVD
title menu.)**
27. D.PROG (While watching the digital TV, press to start
time shift. During DVD playback, press to disply the
program menu for edit.) enter the program*
28. S.MODE (To select the sound mode.)
29. P.SIZE (To select picture size.)
30. S.TITLE (To enable/disable the subtitle in DTV, USB and
DVD mode.)
31. TV/Radio (To select TV and Radio in DTV mode.)
* only if PVR is enabled (R-Line/T-Line/M-Line optional, standard in S-Line)
Note:
• Do not use rechargeable (Ni-Cd) batteries.
• Do not attempt to recharge, short circuit, disassemble, heat or throw the batteries into the
fire.
• Do not splash the remote control with water or put it on a wet object to avoid possible
damage.
• Do not drop, step on or cause any impact to the remote control unit. This may damage it,
resulting malfunction.
• Do not mix old and new batteries.
• If the remote control unit is not going to be used for a long time, remove the batteries.
• Strong light such as direct sunlight impinging on the remote sensor can cause operational
failure. Place the remote control to avoid direct contact with sunlight.
5. START UP
Before using your new LED TV you have to connect it to a suitable power source. For your com-
fort we installed already an extensive channel list for DVB-S/S2. You don´t need to do a channel
search.
For DVB-T/C we suggest, depending on location, to do an automatic channel search. Therefore,
please enter main menu and follow the instruction.
If you need more information or a more detailed User manual, please go to our homepage:
www.alphatronics.de
Choosing a TV Channel
1. Press the CH+ or
button to increase channel number.
2. Press the CH- or button to decrease channel number.
You can select the channel number directly by pressing 0 to 9 buttons three times.
Note:
After selecting the digit button, the digit will be memorized. You can return to the previously
selected programm by pressing .
Selecting input source
You can select the input source by pressing the SOURCE button on the top of the panel or press
the SOURCE button on the remote control. Then press enter or the
to confirm.