Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # DIG100XS-BR Jar Fountain with LED Lights Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V6.
NOTES CONTENTS Contents ........................................................ 1 What’s included ............................................. 2 Features ........................................................ 3 Assembling & using your product.................. 4 Replacement Parts ........................................ 8 Troubleshooting ............................................ 9 Caution ........................................................ 10 Warranty ..........................................
WHAT’S INCLUDED LIMITED WARRANTY INFORMATION Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
9. Congratulations, your fountain is now complete. Don’t forget to add water regularly as water will evaporate over time. 3. From the back opening of the fountain connect the vinyl tubing from inside the fountain into the water pump. Relax and enjoy your new fountain. REPLACEMENT PART ITEM# • Pump and Light Kit ………………...DIG100XS-KIT 4. With the pump still out, connect the single pin light connector into the pump wiring harness.
5. Through the back opening, pull out the two prong connecter from the pump and light wiring harness and connect it to the transformer. 7. Plug the transformer into a local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place. Alpine Quick Tip #2 Double check all connecter to make sure they are tight. 6. Gently pour water into the fountain basin, being careful not to overflow and cause splashing.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use. 1. Place the fountain base on a smooth & level surface. Allow enough space to access the pump. 2. Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled. Alpine Quick Tip #1 Turn to the Right / Clockwise to turn down the water flow.
CAUTION FEATURES • • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid. • Periodically change water & clean the pump to keep free from microorganisms • Disconnect and store the unit in a dry place if not in use for an extended period of time, or during freezing weather. • Do not operate the fountain in temperatures below 41° F / 5° C. • Do not operate with water above 90°F / 30°C.