Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # WIN322 Buddha Tabletop Fountain with LED Light Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V4.
NOTES CONTENTS Contents ........................................................ 1 What’s Included ............................................. 2 Features ........................................................ 3 Assembling & Using Your Product ................ 4 Replacement Parts ........................................ 8 Troubleshooting ............................................ 9 Caution ........................................................ 10 Warranty ...........................................
WHAT’S INCLUDED LIMITED WARRANTY INFORMATION Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
REPLACEMENT PART ITEM# • Replacement Pump ……………….P065 • Replacement LED Light……………RLS100 • Replacement Transformer…………PL022T 3. Pull out the power cord plug through the back opening & connect to the transformer. ALSO AVAILABLE FROM ALPINE • Fountain Care Formula…………….....PPL100 Foam and scale remover for indoor and outdoor fountains. • Americana® UV Acrylic Sealer ...……RRR106 Provides protective clear coating for all painted surfaces. • Touch Up Paint Kit....…………….…....
5. Plug the pump and light cord into your local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place. 7. Congratulations, your fountain is now complete. Don’t forget to add water regularly as water will evaporate over time. Relax and enjoy your new fountain. 6. You can now adjust the water pump to your flow preference. (see Quick Tip #1) Once set, install the Back Door Cover by sliding it into the designated opening.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use. 1. Place the fountain base on a smooth & level surface. Allow enough space to access the pump. 2. Remove the pump from the back opening of the Fountain and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled.
CAUTION FEATURES • • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid. • Periodically change water & clean the pump to keep free from microorganisms • Disconnect and store the unit in a dry place if not in use for an extended period of time, or during freezing weather. • Do not operate the fountain in temperatures below 41° F / 5° C. • Do not operate with water above 90°F / 30°C.