Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # WIN454 Curved Log Rainforest Fountain with LED Lights Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V2.
NOTES CONTENTS Contents ........................................................ 1 What’s Included ............................................. 2 Features ........................................................ 3 Assembling & Using Your Product ................ 4 Replacement Parts ........................................ 8 Troubleshooting ............................................ 9 Caution ........................................................ 10 Warranty ...........................................
WHAT’S INCLUDED LIMITED WARRANTY INFORMATION Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
REPLACEMENT PART ITEM# • Replacement Pump ……………….…….PAD400 • Replacement LED Light………………….RLS100 • Replacement Transformer......................PL022T 3. From the back opening of the fountain take the vinyl tubing connection from inside the fountain into the water pump, then place the pump into the fountain. Note: Tubing may be zip-tied with the LED light cords. Cut zip-ties carefully with scissors to separate. ALSO AVAILABLE FROM ALPINE • Fountain Care Formula…………….....
5. Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and the water runs clear during operation. NOTE: We recommend that you use distilled water to prevent scale build-up. The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly 7. You can now adjust the water pump to your flow preference.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use. 1. Place the fountain base on a smooth & level surface. Allow enough space to access the pump. 2. Take the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled. Alpine Quick Tip #1 Turn adjuster to the Left to increase the water flow.
CAUTION FEATURES • • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid. • Periodically change water & clean the pump to keep free from microorganisms • Disconnect and store the unit in a dry place if not in use for an extended period of time, or during freezing weather. • Do not operate the fountain in temperatures below 41° F / 5° C. • Do not operate with water above 90°F / 30°C.