User's Manual

90-EN
When an optional camera is connected, the view video of camera can be
output to the monitor.
Front camera, Rear camera or Side camera can be connected to this unit.
Make the Camera Select setting (Front, Rear, Side or Other) according to
your connected camera. For details, see “Setting the Camera Input”
(page @@).
When using the optional Multi Camera Interface box, you can connect
up to 3 cameras: Front Camera, Rear Camera, and Side Camera. When
connecting the optional Multi Camera Interface box, you need to set
each camera to On/Off in “Setting Multi Camera to On/Off ” (page @@).
When displaying the camera view while connected to the optional Multi
Camera Interface box, you can switch the camera view using the switch
button at the top of the screen.
Front camera:
When the HCE-C257FD is connected, conditions in front of the
vehicle, such as objects, people and other hazards, can be seen.
Rear camera:
If an HCE-C127D/HCE-C157D/HCE-C252RD camera is connected,
when the vehicle is reversed, the rear camera view (guide marks for
vehicle width and available distance) is displayed automatically on
the screen of this unit.
Side camera:
If the HCE-C259SD is connected, you can check for obstacles in the
blind spot on the passenger side.
Other camera:
Set when connecting to a camera other than the Front camera or Rear
camera, such as a room camera and side camera.
Rear Camera Operation
1 Press the MENU button.
The menu screen is displayed.
• You can also display the menu screen by touching [ ]
on the lower part of the Audio source screen or by swiping upward.
2 Touch [Camera].
The Rear Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[ ] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see “Adjusting the
Rear/Front/Side Camera Guide” (page 46).
• If you connect a Front Camera and Side Camera using the optional
Multi Camera Interface box, touch [Front] or [Side] to switch the
Camera display.
• You can also switch the Camera view by Pressing (CAMERA)
button. (X110 only)
1 Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2 If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• You can perform a Guide Adjustment. For details, see “Adjusting the
Rear/Front/Side Camera Guide” (page 46).
If the camera has a view switch function, the Direct Change switch is
displayed.
1 Touch the screen when the image from the rear camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2 Touch [Back], [Panorama], [Corner] or [Top].
The image pattern changes.
• For detailed information about image patterns, see the camera Owner’s
Manual.
• You can perform a Guide Adjustment. For details, see “Adjusting the
Rear/Front/Side Camera Guide” (page 46).
1 Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2 Touch [Guide Off] or [Hitch Guide Off] on the Rear
camera display screen.
The guide disappears, and then the [Guide Off] or [Hitch Guide
Off] switch changes to [Guide On] or [Hitch Guide On].
3 Touch [Guide On] or [Hitch Guide On] to turn on the
guide.
Camera Operation
(Optional)
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
See “Picture Quality. Setup” (page 39).
Displaying the Rear Camera Image from the
Menu screen
[Camera] button
Displaying the rear view video while the car is
in r
everse
Switching the Image Pattern for the Rear
Ca
mera
[Back]: Rear View
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
Guide Display ON/OFF Setting