User's Manual

94-EN
When the unit is connected to the car’s iDataLink module, you can
transfer and receive data between the car and the unit to check the car’s
status, or to make various operations from the unit.
When you use iDataLink mode, set each setting other than
“Aftermarket” in “Setting the Source Category” (page @@).
• Available functions differ depending on your vehicle. For details, refer to
your vehicle’s instruction manual.
Access to iDataLink Mode
You can check the car’s status, set the air conditioning, etc.
1 Press and hold the ## (Favorite) button for at least 2
seconds, or touch [ ] (Vehicle Info.) in the Menu
screen to activate iDataLink mode.
• The iDataLink mode screen selected in “Setting the Default
Vehicle Screen” (page @@) is displayed.
2 Touch the desired tag on the top of the screen.
• The displayed tag options differ depending on the type of vehicle.
Setting contents:
Climate / Gauges / Park Sensor / Vehicle Info. / Car Setting
Climate screen example
3 Adjust or confirm the item/information accordingly.
• Operable functions and displays may differ depending on the vehicle.
iDataLink Function Screen example
Climate screen example
You can control the temperature inside the vehicle, etc.
Gauges screen example
You can check the vehicle's speed, the engine's rotation speed, etc.
Parking sensor screen example
You can check the distance from the front and rear of the vehicle to an
obstacle.
• If the car sensor detects an obstacle, the screen automatically changes to
the Parking sensor screen. For details, see “About Parking Sensor screen”
(page @@).
Vehicle Information screen example
You can check for open doors, check the tire pressure, the battery life,
etc. for the vehicle.
Car Setting screen example (Generic List screen)
The Generic List/Popup Window/Current source control screen is
displayed.
iDataLink Operation
(Optional)