User's Manual

96-EN
3 Edit each switch.
When changing an icon:
Touch the icon, and select your desired icon from the Icon Type
list. After selecting the icon, set the Output Type (Timing) for
each function.
* The Output Type (Timing) sets the operating time for that function
when you touch the icon on the External Accessory screen.
When changing the name:
Touch the icon name, then input characters into Edit Name
(Keypad). You can also select a basic name from the [Template]
of the Keypad. For details on how to input characters using the
keypad, see “How to Input Characters and Numbers (Keypad)”
(page @@). (When a basic name is selected from the Template,
the icon will be changed according to the basic name.)
When changing the layout of the switches:
Drag and drop an icon to the desired location.
To revert to a default icon:
Touch the check box “ ” of the icon that you want to revert to
default, and then touch [ ] (Reset). If you touch [ ] (Reset
All), all icons revert to default icons.
4 After editing is complete, touch [ ] (Back).
5 After the caption for the confirmation is displayed, touch
[OK].
• If you touch [ ] (Cancel) while editing, the screen switches to the
Edit screen.
Pulse: The operating time when you touch the icon. (Select
from 11 steps, ranging 0.5 sec. to 10 sec.)
Latch: Switch On/Off by touching the icon.
Momentary: Operating time lasts from when an icon is touched to
when it is released.