User's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Features
- Getting Started
- Radio/RBDS
- Apple CarPlay (Optional)
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- Setup
- Audio Setup
- Audio Setup Operation
- Adjusting Balance (Between Left and Right)
- Adjusting Fader (Between Front and Rear)
- Setting the Bass Level
- Setting the Treble Level
- Setting the Subwoofer
- Setting the Bass Engine SQ
- Setting the Volume for Each Application
- Setting the MX (Media Xpander)
- Equalizer Presets (EQ Presets)
- Setting Defeat
- Display Setup
- General Setup
- Application Setup
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
9-EN
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 20
languages to choose from. Touch the screen and
slide your finger up or down, and then touch the
desired language.
2
Touch [OK].
The radio screen is displayed.
• Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
Adjusting the Volume
Adjust the volume by touching or .
Volume increases continuously by touching and holding .
Volume: 0 - 35
Muting the Sound
Touch and hold for at least 2 seconds to activate the
MUTE mode.
Operating an Item in a List
1
To scroll through a list, touch the screen and slide
your finger up or down.
The screen will scroll along with your finger movement.
• To make a selection, touch the screen at the desired item, and
then lift your finger without moving the screen up or down.
2
Touch the button and slide your finger right or left to
change ON/OFF.
Using Siri
You can use the Siri function of your iPhone. To use Siri from this unit,
make sure that this function is enabled in your iPhone settings.
Press Siri.