User Manual Alpine Navigation Navigation software for the Alpine INE-W960/INE-W960S/INE-NAV-60 US English January 2015, ver. 1.
Thank you for choosing the Alpine unit as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information ......................................................................................... 6 2 Getting started ......................................................................................................................... 7 2.1 Buttons and other controls on the screen .........................................................................................8 2.1.1 Using keyboards.....................................................................
3.1.3 Using the free form search ..................................................................................................................... 46 3.1.4 Selecting a map location as the destination ............................................................................................ 47 3.1.5 Selecting the destination from your Address Book ................................................................................ 48 3.1.6 Selecting a recent destination from the History ...................
6 Glossary .................................................................................................................................. 78 7 Copyright note .......................................................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 76). 2. Read the End User License Agreement. Tap 3. The Configuration wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings (page 76). 5.
6. If needed, modify the default route planning options. Later you can change them in Route settings (page 70). 7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 67). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
List When you need to select from Grab the list anywhere and several options, they appear in a slide your finger up or down. list. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. Alternatively, move between pages with the and buttons and tap the value that you want. Radio button When there are only a few choices, radio buttons may be used instead of lists. Only one value can be selected. Tap one of the buttons to select a new value.
Correcting your entry on the keyboard Tap to remove the unneeded character(s). Tap and hold the button to delete several characters or the entire input string. Entering a space, for example between a first name and a family name or in multi-word street names Tap the Entering upper and lower case letters When entering a text, the first character appears in upper case while button at the bottom center of the screen. the rest of the text is in lower case.
Tapping and holding the Tap and keep pressing the following buttons to reach extra functions: screen Gestures (drag&drop) Tap and hold any of the , , , , , and buttons on the Map screen: you can rotate, tilt or scale the map continuously. Tap and hold on keyboard screens: you can delete several characters quickly. Tap and hold continuously. or in long lists: you can scroll pages You need to drag and drop the screen only in cases like: Moving the handle on a slider.
There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. Two data fields are displayed on the left. The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). There are no data fields without a given destination.
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (maneuver) and the next street or the next city/town. There is a field in the top left corner that displays the next maneuver. Both the type of the event (turn, traffic circle, exiting freeway, etc.) and its distance from the current position are displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching a waypoint. Approaching the destination. These fields also act as buttons: Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
This feature can be turned off in Visual Guidance settings. 2.2.3.5 Freeway exit services You may need a gas station or a restaurant during your journey. This feature displays a new button on the map when you are driving on freeways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed.
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Current GPS position and Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, your software uses the last known position as the start point.
Zooming in and out Changes how much of the map is displayed on the screen. , Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimized content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode.
2.2.5 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. . You can access this screen from the map in one of the following ways: If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the Where Am I? screen. In the Navigation menu, tap and then .
: Police stations : Gas stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu. When you open the menu, the destination search buttons appear on the screen. Tap any other menu button at the top and their feature buttons appear below.
3 On-road navigation When first started, Alpine unit calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
any of the above, starting the search with the ZIP code (page 34) You can also search for an address with the free form search (page 46). 3.1.1.1 Entering an address (United States) To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2. By default, the software proposes the country and state where you are. If needed, tap , enter the first few letters of the destination country or state on the keyboard, and select one from the list.
4. Enter the street name: a. Start entering the street name on the keyboard. b. Find the street you need: The most likely street name is always shown in the input field. To accept it, tap If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap 5. 6. ). Select the street from the list. Enter the house number: a. Enter the house number on the keyboard.
If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: tap Tip! then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering an address (Canada) To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2.
If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap 4. ). Select the city/town from the list. Enter the street name: a. Tap (if you have selected a city/town above, this step is not needed). b. Start entering the street name on the keyboard. c. Find the street you need: The most likely street name is always shown in the input field. To accept it, tap .
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.
The most likely city/town name is always shown in the input field. To accept it, tap . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap 1. ). Select the city/town from the list. Enter the street name: a. Tap needed). b. Start entering the street name on the keyboard. c.
5. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.
3. Enter the street name: a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: The most likely street name is always shown in the input field. To accept it, tap . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 4. 5. Enter the house number: a.
3.1.1.5 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: 1. In the Navigation menu, tap the following buttons: 2. Select the country, state and city/town as described earlier (page 22). 3. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: . (if you have selected a city/town above, this step is not needed).
5. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.
4. Instead of entering the house number, tap selected as the destination. . The midpoint of the street is 5. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap ) appears at the new location. Tap to select a different destination. 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
3.1.1.7 Selecting a city/town center as the destination The city/town center is not the geometric center of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. In the Navigation menu, tap the following buttons: , 2. Select the country and state as described earlier (page 22). 3. Select the destination city/town: . a. Tap b.
to confirm the destination, or tap to select a different destination. 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.8 Entering an address with a ZIP code All of the above address searching possibilities can be performed with entering the ZIP code instead of the city/town name. Find below an example with a full address: 1.
4. Enter the street name: a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: The most likely street name is always shown in the input field. To accept it, tap . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap 5. 6. ). Select the street from the list. Enter the house number: a.
7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.9 Tips on entering addresses quickly When you are entering the name of a city/town or a street: Only those letters are offered on the keyboard that appear in possible search results. All other characters are grayed out.
3.1.2 Selecting the destination from the Places of Interest You can select your destination from the Places of Interest included with your software.
4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place.
2. The preset search categories appear: : If an active route exists, gas stations are searched along the route. If there is no active route (destination is not selected), they are searched around the current position. If the current position is not available either (no GPS signal), they are searched around the last known position. : If an active route exists, parking lots are searched around the destination of the route.
4. (optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place. Tap to return to the map. 7.
Tap to search for a place within a selected city/town. (The result list will be ordered by the distance from the center of the selected city/town.) Tap to search for a place around the destination of the active route. (The result list will be ordered by the distance from the destination.) Tap to search along the active route, and not around a given point.
7. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route. 8. Finally, the results appear in a list. 9. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 10.
13. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. 1. In the Navigation menu, tap the following buttons: , 2. Tap 3.
4. (optional) If you have selected , select the city/town to search in. 5. Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. 6. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 7. Tap if you have not done it before.
8. Using the keyboard, start entering the name of the Place. 9. After entering a few letters, tap containing the entered character sequence. to open the list of Places with names 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11. Browse the list if necessary and tap one of the list items.
3.1.3 Using the free form search A quick way to search for an address, a Place, an Address Book entry or a History item is to use the free form search. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. In the left field enter the name you are looking for. It can be a street address (just the street name or both the street and the house number), the name of a Place, a previous destination or an Address Book entry. 4.
to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.4 Selecting a map location as the destination 1. In the Navigation menu, tap the following buttons: , . 2. Locate your destination on the map: move and scale the map as needed. 3.
3.1.5 Selecting the destination from your Address Book You can select a location that you have already saved as an Address Book entry to be your destination. Adding a location to the Address Book is described on page 57. 1. Access the Address Book: in the Navigation menu, tap 2. The Address Book is displayed. 3. Tap the entry that you want to set as your destination. If necessary, browse down to see more of the list or tap 4. and then tap . and enter a few letters from the name of the entry.
3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: If you are in the Navigation menu, tap and then tap . 2. The list of recent destinations appears. Smart History promotes three destinations to the first page based on your previous routes (most likely destinations). The rest of the destinations are ordered by time they were last selected. If necessary, scroll the list to see earlier destinations. 3.
3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 4. (optional) If necessary, tap in UTM format. 5. When finished, tap 6. A full screen map appears with the selected point in the middle.
3.1.8 Navigate to a location stored in a picture You can also set the location stored in a picture as your destination. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. The list of picutres stored on the USB memory appears. Select one picture from the list. 4. A full screen map appears with the selected point in the middle. If necessary, tap the map menu and tap . somewhere else to modify the destination.
3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu. 1. In the Navigation menu, tap . 2. Tap 3. There is only one line in the list of route points, the start point of the route, normally the current GPS position. 4. Tap 5. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 6.
3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap . The active route is displayed in its full length on the map together with additional information and controls. 3.3 Modifying the route When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. 3.3.
Tap to add the newly selected location as an intermediate destination to your route. The other destinations of the route remain intact. Note: the new waypoint is placed among destinations to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature. Tap to append the newly selected destination at the end of the route. The other destinations of the route remain intact. The previous final destination is now the last waypoint. 3.3.
4. The Destination menu appears and you can select the start point of the route the same way you select a destination. 5. When the new start point is set, tap 6. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 7. To return to normal navigation, tap . . 3.3.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations.
Tap to delete a destination. Tap to modify the start point of the route. Tap to reorder the list. You can do it manually or you can let the application optimize the route for you. 3.3.4 Canceling the active route To cancel the navigated route, tap route is deleted with all its waypoints. in the Navigation menu, and then tap .. The active 3.3.5 Checking route alternatives To recalculate the active route with a different route planning method, you can modify the Route settings.
4. Or if you cannot find a good alternative, tap different routing methods. and scroll down for routes with 5. Select one of the route alternatives then tap to return to the Map screen. The software recalculates the route. The orange line now shows the new recommended route. 3.4 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. 1.
3.5 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point. 3.
3. Scroll down the list and tap . 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap to save the changes to the alert point. 3.7 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap 3. Tap .
1. (optional) You have the following controls during the simulation: : Jump to the next route event (maneuver). : Pause the simulation. : Jump to the previous route event (maneuver). 2. Tap : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. to stop the simulation.
4 Off-road navigation When first started, Alpine unit calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode from the Navigation menu. Tap , and then , . Most of the procedures described for on-road navigation also apply to off-road navigation.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction.
Maneuver restrictions and directional constraints are taken into account when planning a route. Roads are used only if access for cars is allowed. Private roads and resident-only roads are used only if they are inevitable to reach the destination. Walkways are excluded from routes. : All maneuvers are available in intersections. Directional constraints are taken into account the way that opposite direction is allowed with a low speed.
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO 2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values and the price of the fuel.
5.1.4 Speed limit warning Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. Speed warning can be fine-tuned in Sound and Warning settings. You can set the relative speed above which the application initiates the warning.
Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information. If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile.
5.3 Settings menu You can configure the program settings, and modify the behavior of the software. In the Navigation menu, tap . The Settings menu has several options. Tap or scroll with your finger to see the full list. Button Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Enable different sounds and alerts in the application. These settings determine how routes will be calculated.
The About section provides you with product information. Read the Software and Database End User License Agreement, or check the map and other contents of the application. You can also access program usage statistics. 5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application.
Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive visible and/or audible warnings. Adjust the slider to set the relative speed above which the application initiates the warning.
5.3.2 Route settings These settings determine how routes will be calculated. Button Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation. You can edit the parameters of the selected vehicle profile, or you can even create new vehicle profiles if you tap More.
Vehicle profiles: When you first tap options: , you see the list of default vehicle profiles. You have the following Button Description You can edit the parameters of the vehicle profile. Tap this button to reveal the below options. Tap this button to create your own vehicle profile. Tap this button to reset all vehicle profiles to their default settings. When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the following parameters.
Maneuver restrictions and directional constraints are taken into account when planning a route. Roads are used only if access for cars is allowed. Private roads and resident-only roads are used only they are inevitable to reach the destination. Walkways are excluded from routes. : All maneuvers are available in intersections. Directional constraints are taken into account the way that opposite direction is allowed with a low speed.
Gives a quick but fuel efficient route based on the fuel consumption data given in Route settings (page 70). Travel cost and CO2 emission calculations are estimations only. They cannot take elevations, curves and traffic conditions into account. Results in a route with fewer turns and no difficult maneuvers. With this option, you can make your software to take, for example, the freeway instead of a series of smaller roads or streets. 5.3.3 Map settings You can fine-tune the appearance of the Map screen.
Replace the default position marker to one of the 3D vehicle models. You can select separate icons for different vehicle types selected for route planning. Separate icons can be used for car and the other vehicles. Show or suppress 3D landmarks, 3D artistic or block representations of prominent or well-known objects. (optional) Show or suppress 3D city models, 3D artistic or block representation of full city building data containing actual building size and position on the map.
Whenever adequate information is available, lane information similar to the real ones on road signs above the road is displayed at the top of the map. You can turn this feature on or off. If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. You can turn this feature on or let the map be displayed for the whole route. When entering tunnels, the surface roads and buildings can be disturbing.
5.3.5 Regional settings These settings allow you to customize the application for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. Button Description This button displays the current written language of the user interface. By tapping the button, you can select a new language from the list of available languages. The application will restart if you change this setting; you are asked to confirm this.
5.4 Trip monitor If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and elevation profile. If track log has also been saved, you can display it on the map with the selected color. Track logs can be exported to GPX files for later use. The Trip monitor can also be accessed from the Information menu.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Route A sequence of route events, i.e. maneuvers (for example, turns and traffic circles) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point. Heading-up map orientation In this mode the map is rotated so its top always points in the current driving direction.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2015 – Alpine Electronics, Inc. All rights reserved. © 2015 – NNG Kft. All rights reserved. © 2015 HERE. All rights reserved. See http://corporate.navteq.
