User Manual Alpine Navigation Navigation software for the Alpine INE-W990BT UK English January 2015, ver. 1.
Thank you for choosing the Alpine unit as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information .........................................................................6 2 Getting started .........................................................................................................7 2.1 Buttons and other controls on the screen....................................................................... 8 2.1.1 Using keyboards .................................................................................................................. 9 2.
3.1.5 Selecting the destination from your Address Book ............................................................ 47 3.1.6 Selecting a recent destination from the History ................................................................. 48 3.1.7 Entering the coordinate of the destination ......................................................................... 49 3.1.8 Navigate to a location stored in a picture ........................................................................... 50 3.1.
.3.8 Trip monitor settings .......................................................................................................... 82 5.4 Trip monitor ................................................................................................................. 82 6 Glossary ..................................................................................................................83 7 Copyright note .............................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 81). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings (page 81). 5.
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 71). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
Radio button When there are only a few Tap one of the buttons to choices, radio buttons may select a new value. be used instead of lists. Only one value can be selected. Switch When there are only two Tap it to turn the switch choices, a checkmark on or off. shows whether the feature is enabled. Slider When a feature can be set to different values in a range, the software shows an indicator on a gauge that displays and sets the value. Drag the handle to move the slider to its new position.
Entering upper and lower case letters When entering a text, the first character appears in upper case while the rest of the text is in lower case. Tap to enter an upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return. Entering symbols Tap to switch to a keyboard offering numeric and symbol characters. Finalising the keyboard entry (accepting the suggested search result) Tap Finalising the keyboard entry (opening the list of search results) . Tap . Tap .
Gestures (drag&drop) You need to drag and drop the screen only in cases like: Moving the handle on a slider. Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.2 Map screen 2.2.1 Navigating on the map The Map screen is the most frequently used screen of the software.
The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it.
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching the destination. These fields also act as buttons: Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed. If you want to display other types of Places for the exits, you can change the icons in Visual Guidance settings (page 79). 2.2.3.
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Current GPS position and Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, your software uses the last known position as the start point.
In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to list the event in that category or select the top row to open the list of all traffic events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 2.2.4 Manipulating the map Tap the map anywhere to browse it during navigation.
Zooming in and out Changes how much of the map is displayed on the screen. , Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode.
2.2.5 Quick menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping The menu will close after a few seconds of inactivity or if you tap . . Most of these functions are shortcuts. They are accessible from the menu system. There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button (page 74).
This button skips the next waypoint from the route. This button opens a 2D map scaled and positioned to show the entire route. This button opens the Visual Guidance settings screen. This button opens the list of traffic event types. This button lets you bypass parts of the recommended route. This button opens the Trip Monitor screen where you can manage your previously saved trip logs and track logs. This button opens the list of manoeuvres (the itinerary).
This button opens the parameters of the selected Vehicle profile. 2.2.6 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. .
The following services can be searched around the current position or the last known position: : Car repair and roadside assistance services : Medical and emergency services : Police stations : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu. When you open the menu, the destination search buttons appear on the screen.
Tap to get information about your current position, the GPS reception or the trips you have taken or to run some additional applications.. Tap Press the MAP hardware button to start navigating on the map. to customise the way the navigation software works.
3 On-road navigation When first started, Alpine unit calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
3.1.1.1 Entering an address To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2. By default, the software proposes the country and city/town where you are. If needed, tap , enter the first few letters of the country name on the keyboard, and select one country from the list of results. 3. If needed, select a new city/town: a. Tap b. Start entering the name of the city/town on the keyboard. c. Find the city/town you need: .
If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 4. 5. Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.
If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: Tip! tap then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap the input field above. The midpoint of the street is selected as the destination. 5. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap ) appears at the new to confirm the destination, or tap to select a different destination. 6. After a short summary of the route parameters, the map appears showing the entire route.
If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap the street from the list. ). Select 4. Instead of entering the house number, tap street is selected as the destination. 5. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap .
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. In the Navigation menu, tap the following buttons: , 2. If necessary, modify the country as described earlier (page 26). 3. Select the destination city/town: a. Tap b.
6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name. Find below an example with a full address: 1. In the Navigation menu, tap the following buttons: 2.
The most likely street name is always shown in the input field. To accept it, tap . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap the street from the list. 5. 6. ). Select Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. Tap to finish entering the address.
3.1.1.6 Tips on entering addresses quickly When you are entering the name of a city/town or a street: Only those letters are offered on the keyboard that appear in possible search results. All other characters are greyed out. As you are typing, the most likely result is always displayed in the input field. If the guess is correct, tap to select it. After entering a couple of letters, tap contain the specified letters.
If you are in the Navigation menu, tap , and then tap 2. Using the keyboard, start entering the name of the Place. 3. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). If you need to reorder the list, tap . 5.
3.1.2.2 Searching for a Place of Interest using preset categories The Preset search feature lets you quickly find the most frequently selected types of Places. 1. In the Navigation menu, tap the following buttons: 2. The preset search categories appear: . : If an active route exists, petrol stations are searched along the route. If there is no active route (destination is not selected), they are searched around the current position.
If an active route exists, accommodation is searched around the destination of the route. If there is no active route (destination is not selected), they are searched around the current position. If the current position is not available either (no GPS signal), they are searched around the last known position. 3. Tap any of the quick search buttons to get an instant list of Places. 4.
3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. 1. In the Navigation menu, tap the following buttons: , 2. Tap 3. Select the area around which the Place should be searched for: . . Tap to search around the current position or if it is not available, around the last know position. (The result list will be ordered by the distance from this position.) Tap to search for a place within a selected city/town.
6. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route. 7. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route. 8. Finally, the results appear in a list. 9.
11. (optional) Tap to see the details of the selected Place. Tap to return to the map. 12. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap destination, or tap to confirm the to select a different destination. 13. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.2.
Tap to search along the active route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming petrol stations or restaurants. (The result list will be ordered by the length of the necessary detour.) 4. (optional) If you have selected , select the city/town to search in. 5. Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. 6.
7. Tap if you have not done it before. 8. Using the keyboard, start entering the name of the Place. 9. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11.
14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.2.5 Selecting nearby assistance from 'Where Am I?' You can quickly search for nearby assistance from the 'Where Am I?' screen. 1. On the Map screen, tap to open the Quick menu. 2. Tap 3.
4. Tap any of the quick search buttons to get an instant list of that type of Places. 5. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
3.1.3 Using the free form search A quick way to search for an address, a Place, an Address Book entry or a History item is to use the free form search. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. In the left field enter the name you are looking for. It can be a street address (just the street name or both the street and the house number), the name of a Place, a previous destination or an Address Book entry. 4.
3.1.4 Selecting a map location as the destination 1. In the Navigation menu, tap the following buttons: , 2. Locate your destination on the map: move and scale the map as needed. 3. Tap the location that you want to select as your destination. The Cursor ( appears. 4. Tap 5. After a short summary of the route parameters, the map appears showing the entire ) to select the Cursor as the destination. route. The route is automatically calculated. Tap parameters, or tap . and start your journey.
3.1.5 Selecting the destination from your Address Book You can select a location that you have already saved as an Address Book entry to be your destination. Adding a location to the Address Book is described on page 59. 1. Access the Address Book: If you are on the Map screen, tap If you are in the Navigation menu, tap and then tap and then tap . . 2. The Address Book is displayed. 3. Tap the entry that you want to set as your destination.
3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: If you are on the Map screen, tap If you are in the Navigation menu, tap and then tap . and then tap . 2. The list of recent destinations appears. Smart History promotes three destinations to the first page based on your previous routes (most likely destinations). The rest of the destinations are ordered by time they were last selected.
3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 4. (optional) If necessary, tap the coordinate in UTM format. 5. When finished, tap 6. A full screen map appears with the selected point in the middle.
3.1.8 Navigate to a location stored in a picture You can also set the location stored in a picture as your destination. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. The list of picutres stored on the USB memory appears. Select one picture from the list. 4. A full screen map appears with the selected point in the middle. If necessary, tap the menu and tap map somewhere else to modify the destination. The Cursor ( location. Tap .
3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu. 1. In the Navigation menu, tap . 2. Tap 3. There is only one line in the list of route points, the start point of the route, normally the current GPS position. 4. Tap 5. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 6.
3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap . The active route is displayed in its full length on the map together with additional information and controls. 3.3 Checking route parameters and accessing route related functions You can check different parameters of the route recommended by the software. 1. In the Navigation menu, tap 2. The following pieces of information are displayed: 3. .
Tap to bypass a part of the route. Tap to delete the active route. Tap to open a list with more options like changing route parameters, simulating the route, saving the active route or loading a previously saved route. Tap to return to the Navigation menu. 3.4 Modifying the route When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. 3.4.
Tap to append the newly selected destination at the end of the route. The other destinations of the route remain intact. The previous final destination is now the last waypoint. 3.4.2 Setting a new starting position for the route For normal navigation, all routes are planned from the current position. In order to check future routes, simulate them or see their length in time and distance, you can turn off the GPS receiver.
4. The Destination menu appears and you can select the start point of the route the same way you select a destination. 5. When the new start point is set, tap 6. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 7. To return to normal navigation, tap . . 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations.
Tap to delete a destination. Tap to modify the start point of the route. Tap to reorder the list. You can do it manually or you can let the application optimise the route for you. 3.4.4 Cancelling the active route To cancel the navigated route, do one of the following: If you are on the Map screen, tap and then tap have a route with waypoints, you need to tap until all waypoints are deleted.) In the Navigation menu, tap deleted with all its waypoints. and then tap . (If you ..
3. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 4. Or if you cannot find a good alternative, tap routes with different routing methods. 5. Select one of the route alternatives then tap to return to the Map screen. The software recalculates the route. The orange line now shows the new recommended route. and scroll down for 3.4.
3. The software recalculates the route optimised for the new vehicle type. The orange line now shows the new recommended route. 3.4.7 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. 1. On the Map screen, tap 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
3.5 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4.
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point.
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap . . to save the changes to the alert point.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap 3. Tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. . 1. (optional) You have the following controls during the simulation: : Jump to the next route event (manoeuvre). : Pause the simulation.
2. Tap to stop the simulation.
4 Off-road navigation When first started, Alpine unit calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: From the Navigation menu, tap , and then . From the Map screen, tap , and then . Most of the procedures described for on-road navigation also apply to off-road navigation.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
Roads are used only if access for cars is allowed. Private roads and resident-only roads are used only if they are inevitable to reach the destination. Walkways are excluded from routes. : All manoeuvres are available in intersections. Directional constraints are taken into account the way that opposite direction is allowed with a low speed. A private road is used only if the destination is there. Walkways are excluded from routes.
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO 2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values and the price of the fuel.
You can also choose to see the speed limit sign on the map all the time. 5.1.5 Traffic information in route planning The recommended route is not always the same between two points. Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists.
Tap to open the list of traffic even categories : In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories.
5.2 Information menu The Information menu provides you with various options and additional applications. In the Navigation menu, tap . Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information.
The Fuel consumption monitor helps you keep track of the consumption of your car even if you do not use navigation for all your journeys. Set the initial odometer value and then record the distance taken and fuel filled in whenever you fill your car. You can also set reminders for regular car maintenance. Tap this button to see the sunlit and dark areas of the world. Your current location and route points are marked on the map.
These settings determine how routes will be calculated. Select the type of vehicle you are driving, the road types used in route planning, and the route planning method. You can fine-tune the appearance of the Map screen.
Tap this button to adjust the enhanced TTS features. The following settings are available: You can set the feature to read out traffic messages. Whenever a route is calculated, the software can read out the quick summary of the route. When you cross country borders, the application can read out the information about the country you have just entered. All system messages can also be announced. Street names sound correctly only if you use a native voice profile for the country.
You can control the volume of the following sound types: Button Description These controls affect the volume of the guidance sounds (verbal instructions). Turn off the attention tone preceding verbal instructions or adjust its volume. These controls affect the volume of the alert sounds (beeps). Key sounds provide audible confirmation of tapping the touch screen. These controls affect key sounds. Controls for each sound type: Button Description Use the switch to mute the related sound.
This setting determines how your software uses the received real-time traffic information in route calculation. When calculating a new route, or when recalculation becomes necessary based on the received Traffic events, your software avoids traffic events if it makes sense. You can also set the minimum delay that triggers route recalculation, and you can instruct the application if you want to confirm every recalculation.
The software includes toll roads (pay roads where there is a per-use charge) in the routes by default. If you disable toll roads, your software plans the best toll-free route. The software includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.
Set the maximum speed you travel with the vehicle. Vehicle types: When creating a new vehicle profile, select one of the below vehicle types. : Manoeuvre restrictions and directional constraints are taken into account when planning a route. Roads are used only if access for cars is allowed. Private roads and resident-only roads are used only they are inevitable to reach the destination. Walkways are excluded from routes. : All manoeuvres are available in intersections.
Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a short route to minimise the distance to travel. It can be practical for slow vehicles. Searching for a short route regardless of the speed, this route type is rarely practical for normal vehicles. Gives a quick but fuel efficient route based on the fuel consumption data given in Route settings (page 75).
Switch between daytime and night colour modes or let the software switch between the two modes automatically a few minutes before sunrise and a few minutes after sunset. Select the colour scheme used in daytime mode. Select the colour scheme used in night mode. Replace the default position marker to one of the 3D vehicle models. You can select separate icons for different vehicle types selected for route planning. Separate icons can be used for car and the other vehicles.
You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed. Select the service types displayed for the motorway exists. Choose from the POI categories.
Parking at the destination may not be easy in city areas. As you approach the destination, the software can offer parking category Places near your destination. Tap the "P" button to open a top-down map with the destination and the offered parking Places. Select one and modify the route accordingly. If you leave the recommended route and suddenly exit the motorway, the application offers different alternatives near the exit like petrol stations or restaurants.
5.3.8 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. This is not a button. This line shows the current size of the trip database, the sum of all trip and track logs saved. Trip monitor can record statistical data of your trips.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Route A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point. Heading-up map orientation In this mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2015 – Alpine Electronics, Inc. All rights reserved. © 2015 – NNG Kft. All rights reserved. © 2015 HERE. All rights reserved. See http://corporate.navteq.
