Quick Start

ALPINE INE-W990BT INE-W990BT_QRG (EN)
14-EN
4 Remove the mounting sleeve from the
main unit.
This unit
Bracket keys
(Included)
Slide the unit into the mounting sleeve and
secure it.
Mounting Sleeve
(Included)
Dashboard
This unit
Face Plate*
2
(Included)
Pressure
Plates*
1
Bracket
Rubber Cap
(Included)
Hex Bolt
(Included)
*1 If the installed mounting sleeve is loose in the
dashboard, the pressure plates may be bent slightly to
remedy the problem.
*2 The supplied face plate may be mounted.
5 When your vehicle has the Bracket, mount
the long hex bolt onto the rear panel of the
INE-W990BT and put the Rubber Cap on
the hex bolt. If your vehicle does not have
the Mounting Support, reinforce the head
unit with the metal mounting strap (not
supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1)
already attached to the vehicle’s chassis.
Connect all the leads of the INE-W990BT
according to details described in the
Connections section.
This unit
Screw
Chassis
*
1
*
2
Hex Nut (M5)
Bolt Stud
Metal
Mounting
Strap
Ground Lead
For the screw marked “*2,” use an appropriate screw for
the chosen mounting location.
6 Slide the INE-W990BT into the dashboard
until it clicks. This ensures that the unit is
properly locked and will not accidentally
come out from the dashboard.
•
Conne
(If the AC
If your
separat
The dia
If the sw
battery
position
•
•
•