User Manual Alpine Navigation Navigation software for the Alpine INE-W987D/X800D-U/X800D UK English February 2014, ver. 1.
Thank you for choosing the Alpine INE-W987D/X800D-U/X800D as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information .......................................................... 6 2 Getting started .......................................................................................... 7 2.1 Buttons and other controls on the screen........................................................ 8 2.1.1 Using keyboards ................................................................................................10 2.1.2 Beyond single screen tap .................................
3.1.5 Selecting the destination from your Address Book............................................46 3.1.6 Selecting a recent destination from the History .................................................47 3.1.7 Entering the coordinate of the destination .........................................................48 3.1.9 Building a route from the list of destinations (Create Route) ............................49 3.2 Viewing the entire route on the map ........................................................
.4 Trip monitor .................................................................................................. 81 6 Glossary ................................................................................................... 82 7 Copyright note ........................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 80). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings (page 80). 5.
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 70). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
List When you need to select from several options, they appear in a list. Grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. Alternatively, move between pages with the and buttons and tap the value that you want. Radio button When there are only a few choices, radio buttons may be used instead of lists. Only one value can be selected. Tap one of the buttons to select a new value.
Slider When a feature can be set to different values in a range, the software shows an indicator on a gauge that displays and sets the value. • Drag the handl e to move the slider to its new positio n. • Tap the slider where you want the handl e to appea r; the thumb jumps there. Each key is Alphabetic a touch and screen alphanumeric button. keyboards to enter text and numbers. Virtual keyboar d 2.1.1 Using keyboards You only need to enter letters or numbers when you cannot avoid it.
Entering a space, for example between a first name and a family name or in multi-word street names Tap the Entering upper and lower case letters When entering a text, the first character appears in upper case button at the bottom centre of the screen. while the rest of the text is in lower case. Tap to enter an upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return. Entering symbols to switch to a keyboard offering numeric and symbol Tap characters.
Gestures (drag&drop) You need to drag and drop the screen only in cases like: • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.2 Map screen 2.2.1 Navigating on the map The Map screen is the most frequently used screen of the software.
The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it.
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching the destination. These fields also act as buttons: • Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. • Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed. If you want to display other types of Places for the exits, you can change the icons in Visual Guidance settings (page 79). 2.2.3.
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Current GPS position and Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, your software uses the last known position as the start point.
In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to list the event in that category or select the top row to open the list of all traffic events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 2.2.4 Manipulating the map Tap the map anywhere to browse it during navigation.
Zooming in and out Changes how much of the map is displayed on the screen. , Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode.
2.2.5 Quick menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping The menu will close after a few seconds of inactivity or if you tap . . Most of these functions are shortcuts. They are accessible from the menu system. There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button (page 74).
This button skips the next waypoint from the route. This button opens a 2D map scaled and positioned to show the entire route. This button opens the Visual Guidance settings screen. This button opens the list of traffic event types. This button lets you bypass parts of the recommended route. This button opens the Trip Monitor screen where you can manage your previously saved trip logs and track logs. This button opens the list of manoeuvres (the itinerary).
This button opens the parameters of the selected Vehicle profile. 2.2.6 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. .
The following services can be searched around the current position or the last known position: • : Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu. When you open the menu, the destination search buttons appear on the screen.
• Tap to get information about your current position, the GPS reception or the trips you have taken or to run some additional applications.. • Tap • Press the MAP hardware button to start navigating on the map. to customise the way the navigation software works.
3 On-road navigation When first started, Alpine INE-W987D/X800D-U/X800D calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
3.1.1.1 Entering an address To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2. By default, the software proposes the country and city/town where you are. If needed, , enter the first few letters of the country name on the tap keyboard, and select one country from the list of results. 3. If needed, select a new city/town: . a. Tap b. Start entering the name of the city/town on the keyboard. c.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 4. 5. Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.
Tip! If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: tap then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: , . 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap the input field above. The midpoint of the street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.1.3 Selecting an intersection as the destination To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap and start your journey. 31 .
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. In the Navigation menu, tap the following buttons: , 2. If necessary, modify the country as described earlier (page 27). 3. Select the destination city/town: a. Tap b.
3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name. Find below an example with a full address: , 1. In the Navigation menu, tap the following buttons: 2. If necessary, modify the country as described earlier (page 27). 3. Enter a new city/town using its postal code: a. Tap b. Start entering the postal code. c. Find the city/town you need: • .
results before it appears automatically, tap the street from the list. 5. 6. ). Select Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. to finish entering the address. (If the entered house Tap number cannot be found, the midpoint of the street is selected as the destination.) After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
• • After entering a couple of letters, tap contain the specified letters. to list the items that You can speed up finding an intersection: • Search first for the street with a less common or less usual name; fewer letters are enough to find it. • If one of the streets is shorter, search for that one first. You can then find the second one faster. • You can search for both the type and the name of a road.
3. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no . destination is given). If you need to reorder the list, tap 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
2. The preset search categories appear: • : • If an active route exists, petrol stations are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. • : • If an active route exists, parking lots are searched around the destination of the route.
4. (optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place. Tap to return to the map. 7.
3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. 1. In the Navigation menu, tap the following buttons: , 2. Tap 3. Select the area around which the Place should be searched for: . . • Tap to search around the current position or if it is not available, around the last know position. (The result list will be ordered by the distance from this position.) • Tap to search for a place within a selected city/town.
6. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route. 7. Sometimes the list of brands in the selected Place subcategory appears. Select one to list all Places in the selected subcategory around brand or tap the selected location or along the route. 8. Finally, the results appear in a list. 9.
12. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. 1. In the Navigation menu, tap the following buttons: 2. Tap 3.
4. (optional) If you have selected 5. Select one of the main Place categories (e.g. Accommodation) to search in or tap , select the city/town to search in. to search among all Places. 6. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 7. Tap if you have not done it before. 8. Using the keyboard, start entering the name of the Place.
9. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
2. Tap 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): , and then . • : Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Petrol stations 4. Tap any of the quick search buttons to get an instant list of that type of Places. 5.
3.1.3 Using the free form search A quick way to search for an address, a Place, an Address Book entry or a History item is to use the free form search. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. In the left field enter the name you are looking for. It can be a street address (just the street name or both the street and the house number), the name of a Place, a previous destination or an Address Book entry. 4.
3.1.4 Selecting a map location as the destination 1. In the Navigation menu, tap the following buttons: , . 2. Locate your destination on the map: move and scale the map as needed. 3. Tap the location that you want to select as your destination. The Cursor ( appears. 4. Tap 5. After a short summary of the route parameters, the map appears showing the entire ) to select the Cursor as the destination. route. The route is automatically calculated.
• If you are on the Map screen, tap • If you are in the Navigation menu, tap and then tap and then tap . . 2. The Address Book is displayed. 3. Tap the entry that you want to set as your destination. If necessary, browse down to see more of the list or tap of the entry. 4. and enter a few letters from the name After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated.
3. Select a destination from the list. 4. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3.
5. When finished, tap . 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route and start your journey. parameters, or tap 3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu. 1. In the Navigation menu, tap . 2. Tap 3.
5. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 6. When the new destination is selected, the list returns. 7. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: . 1. In the Navigation menu, tap 2. .
1. In the Navigation menu, tap 2. The following pieces of information are displayed: 3. . • The name and/or address of the destination. • Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken). • The total time of the route. • The total length of the route. • Estimated delay calculated from traffic events on your route.
3.4.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination If you already have a recommended route and you select a new destination as described in the above sections, the application will ask you whether to start a new route, add a new waypoint (intermediate destination) to the route or append the newly selected destination at the end of the current route. • to plan a new route to the newly selected location.
3. The first line is the start of the route, normally the current GPS position. Tap confirm your action at the warning message. and 4. The Destination menu appears and you can select the start point of the route the same way you select a destination. 5. When the new start point is set, tap 6. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 7.
1. In the Navigation menu, tap 2. Tap 3. You have the following options: . . • Tap to add a new destination. • Tap to delete a destination. • Tap to modify the start point of the route. • Tap to reorder the list. You can do it manually or you can let the application optimise the route for you. 3.4.
1. In the Navigation menu, tap 2. Tap 3. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 4. Or if you cannot find a good alternative, tap routes with different routing methods. 5. Select one of the route alternatives then tap to return to the Map screen. The software recalculates the route. The orange line now shows the new recommended route. . . and scroll down for 3.4.
2. Tap and then tap one of the following: • • • • 3. The software recalculates the route optimised for the new vehicle type. The orange line now shows the new recommended route. 3.4.7 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. and then tap . 1. On the Map screen, tap 2. Tap any of the listed road types to modify the route.
3. • - The software includes toll roads (pay roads where there is a per-use charge) in the routes by default. If you disable toll roads, your software plans the best toll-free route. • - The software includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.
3.5 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4.
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point.
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap . . to save the changes to the alert point.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap 3. Tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 1. (optional) You have the following controls during the simulation: . • : Jump to the next route event (manoeuvre). • : Pause the simulation.
2. Tap to stop the simulation.
4 Off-road navigation When first started, Alpine INE-W987D/X800D-U/X800D calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: • From the Navigation menu, tap , and then . • From the Map screen, tap , and then . Most of the procedures described for on-road navigation also apply to off-road navigation.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
• Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only if they are inevitable to reach the destination. • Walkways are excluded from routes. • : • All manoeuvres are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes.
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values and the price of the fuel.
You can also choose to see the speed limit sign on the map all the time. 5.1.5 Traffic information in route planning The recommended route is not always the same between two points. Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists.
Tap to open the list of traffic even categories : In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to open the list of traffic events or tap the first line to show all events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 5.
Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information. If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile.
Select a country from the list and see useful driving information about the selected country. Information may include speed limits on different road types, the maximum blood alcohol level and any compulsory equipment you need to show when stopped by the police. 5.3 Settings menu You can configure the program settings, and modify the behaviour of the software. In the Navigation menu, tap . The Settings menu has several options. Tap or scroll with your finger to see the full list.
Button Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Enable different sounds and alerts in the application. The content of the Quick menu (page 21) is fully customisable. Tap the button you want to change, and select its new function from the list. The recommended route is not always the same between two points.
5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive visible and/or audible warnings. Adjust the slider to set the relative speed above which the application initiates the warning.
5.3.2 Customise Quick menu The content of the Quick menu is fully customisable. Tap the button you want to change, and select its new function from the list. 5.3.3 Traffic settings The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation. Button Description Use this switch to enable or disable historical traffic data and traffic patterns.
The route calculation can be optimised for different situations and vehicle types by changing the planning method. See below for details. To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from the route if possible. Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some of the excluded road types, they will be used but only as much as necessary.
When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the following parameters. You can modify the same parameters when you edit an existing profile: Button Description Tap this button to rename the profile for something meaningful. Enter the average consumption of your vehicle when used in built-up areas. The unit for consumption can be set in Regional Settings. Enter the average consumption of your vehicle when used on highways.
• Private roads, resident-only roads and walkways are excluded from routes. • : • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes. Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars.
Button Description Switch the map view between a 3D perspective view and two 2D topdown view modes. Adjust the basic zoom and tilt levels to your needs. Three preset levels are available. There is also a manual mode when you can set the zoom and tilt levels with the buttons on the left. When selected, the map zooms out to show an overview of the surrounding area if the next route event (manoeuvre) is far. When you get close to the event, the normal map view returns.
5.3.6 Visual guidance settings Adjust how the software helps you navigate with different kinds of route related information on the Map screen. The data fields in the corner of the Map screen can be customised. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Similar to the above possibility, alternative routes can be suggested when driving on normal roads. The software will select a different turn in the upcoming intersection and offers you a different route for the next section of the route. Your options are the similar as above but you cannot modify the offered detour. Parking at the destination may not be easy in city areas. As you approach the destination, the software can offer parking category Places near your destination.
5.3.8 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. This is not a button. This line shows the current size of the trip database, the sum of all trip and track logs saved. Trip monitor can record statistical data of your trips.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Route A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point. Heading-up map orientation In this mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2014 - Alpine Electronics, Inc All rights reserved. © 2014 – NNG KFT All rights reserved. © 2013 HERE http://www.nng.com/partner-materials All rights reserved.
