Use and Care Manual

ManualsBrandsAlpine Furniture ManualsDaybedsBritney Light Grey Linen Twin Daybed

ASSEMBLY INSTRUCTIONS

DAYBED (1096T/1296T)

STEP 1

TOOLS NEEDED : SCREWDRIVER (NOT PROVIDED)

HARDWARE LIST

ITEM DESCRIPTION

QTY

JCBC BOLT M6 x 60mm

3 PCS

JCBC BOLT M6 x 35mm

2 PCS

FLAT WASHER M6 x 19mm

2 PCS

SPRING WASHER M6 x 12mm

2 PCS

CSK SCREW M4 x 20mm

2 PCS

CSK SCREW M4 x 38mm

12 PCS

ALLEN KEY M4

1 PC

ALLEN KEY M5

1 PC

PART LIST

ITEM DESCRIPTION

QTY

SIDES (L & R)

2 PCS

BACK

1 PC

SIDE RAIL

1 PC

CENTER SUPPORT

1 PC

CENTER SUPPORT LEG

3 PCS

SLATS

2 SETS

BED LEG

4 PCS

PAGE 1 OF 3

CAUTIONS: 1. DO NOT FULLY TIGHTEN THE BOLTS UNTIL ALL BOLTS IS READY ASSEMBLED.

2. DO NOT OVER TIGHTEN THE BOLTS TO AVOID CAUSING DAMAGES TO THE THREAD.

3. KEEP ALL PART AND HARDWARE OUT TO REACH BY CHILDREN.

THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. READ THIS INSTRUCTION CAREFULLY.

SEE PART LIST AND HARDWARE LIST FOR GUIDANCE, BE SURE ALL PARTS ARE COMPLETE BEFORE YOU

ASSEMBLE.

Summary of content (3 pages)

PAGE 1
PAGE 1 OF 3 ASSEMBLY INSTRUCTIONS DAYBED (1096T/1296T) THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. READ THIS INSTRUCTION CAREFULLY. SEE PART LIST AND HARDWARE LIST FOR GUIDANCE, BE SURE ALL PARTS ARE COMPLETE BEFORE YOU ASSEMBLE. CAUTIONS: 1. DO NOT FULLY TIGHTEN THE BOLTS UNTIL ALL BOLTS IS READY ASSEMBLED. 2. DO NOT OVER TIGHTEN THE BOLTS TO AVOID CAUSING DAMAGES TO THE THREAD. 3. KEEP ALL PART AND HARDWARE OUT TO REACH BY CHILDREN.
PAGE 2
PAGE 2 OF 3 STEP 2 STEP A : Use the ALLEN KEY M5 (8) to turn loose all the JCBB BOLT and don't pull out. Hang the BACK (B) & SIDE RAIL (C) to SIDES (A). STEP B : Tighten all the JCBB BOLT after assembly the BACK (B) & SIDE RAIL (C).
PAGE 3
PAGE 3 OF 3 STEP 4 7 1 D E STEP 5 D 5 STEP 6 6 F Assembled completed * When moving daybed position, the center support leg levelers must be adjust up right to avoid breakage of the leg and center support.