Installation Guide

HEMLOCK
OWNER’S MANUAL
THANK YOU FOR CHOOSING TO BUY AN ALPINE HAND DRYER.
WARNING
A comprehensive installation guide is enclosed with the unit packaging. This contains
detailed information on the correct installation of the unit which MUST be adhered to
completely. Damage caused by incorrect installation is not covered by your warrantee. If
hardwired, installation MUST be by a qualified electrician. The instructions in this manual
and the installation guide must be followed completely. Failure to do so may result in
incorrect operation, damage to property and/or personal injury. Alpine Industries will not be
held liable for any damage to property or personal injury, or any loss of business or
revenue, if you, your staff, your installer or service engineers have not followed the
instructions given in this manual and the installation guide.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY, NOTE THE
FOLLOWING:
This unit is not intended for use by persons (including children) with reduced physical,
sensory or reasoning capabilities, or lack of knowledge, unless they have been given
supervision or instructions concerning use of the unit by a person responsible for their
safety.
Do not use hand dryer for any purpose other than drying hands. Use this unit only in the
manner intended by the manufacturer.
Before servicing, switch the power to off at the service panel. Ensure the switch is locked to
prevent the power from being accidentally switched on. If the means of switching off the
power cannot be locked, securely fasten a prominent warning device, such as a tag, to the
service panel.
Children should be supervised to ensure that they do not misuse the unit.
Do not obstruct air inlet holes or outlets.
If you have any further questions contact the manufacturer.
CAUTION
Your hand dryer should be located indoors. To reduce the risk of fire or electric shock, do
not expose the internal mechanisms/components of this unit to moisture.