01GB00VPAB222.book Page 1 Friday, January 20, 2006 6:37 PM R EN Vehiclehub Pro VPA-B222 FR • OWNER'S MANUAL Please read before using this equipment. ES • MODE D'EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A.
01GB00VPAB222.book Page 2 Friday, January 20, 2006 6:37 PM CHA-S634 CHA-1214 • CD changer for VPA-B222. • Changeur CD pour VPA-B222. • Cambiador de CD para VPA-B222. • CD changer for VPA-B222. • Changeur CD pour VPA-B222. • Cambiador de CD para VPA-B222. CHM-S630 Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
01GB00VPAB222.book Page 1 Friday, January 20, 2006 6:37 PM ENGLISH Contents Operating Instructions WARNING WARNING ................................................. 4 CAUTION .................................................. 4 PRECAUTIONS ........................................ 5 Getting Started Feature .............................................................. 6 Accessory List .................................................. 6 Initial System Start-Up .....................................
01GB00VPAB222.book Page 2 Friday, January 20, 2006 6:37 PM Adjusting the External Input Audio Level ........................................................ 15 Connecting the Rear Monitor ......................... 16 Setting of the External Monitor Output ...... 16 Setting the VISUALIZER Mode Display ... 16 Connecting a Subwoofer ................................ 16 Subwoofer On and Off ................................ 16 Setting the Commander ..................................
01GB03VPAB222TOC.fm Page 3 Tuesday, January 24, 2006 6:40 PM Switching Audio ............................................. 29 Auxiliary Device (Optional) Operating Auxiliary Devices (Optional) ........ 30 Soft button operation Basic operation ...............................................39 Radio Operation ..............................................40 Setup Operation ..............................................40 Factory System Operating Factory System (Speaker Input mode) ........................
01GB00VPAB222.book Page 4 Friday, January 20, 2006 6:37 PM Operating Instructions WARNING DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
01GB00VPAB222.book Page 5 Friday, January 20, 2006 6:37 PM PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Temperature Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on. Moisture Condensation You may notice the disc playback sound wavering due to condensation.
01GB00VPAB222.book Page 6 Friday, January 20, 2006 6:37 PM Getting Started Initial System Start-Up Be sure to press the RESET button when using the unit for the first time, after installing the CD changer, after changing the car battery, etc. 1 2 Turn off the unit power. Press RESET with a ball-point pen or similar pointed object. Joystick Flipper switch RESET Operation is carried out by the commander.
01GB00VPAB222.book Page 7 Friday, January 20, 2006 6:37 PM Switching a Source 1 Radio Press SOURCE/POWER. The source selection screen is displayed. Screen example Joystick Displays source modes that can be selected (The kind of source modes that are displayed varies depending on connection and setting) 2 Press the joystick up or down to select the desired source, then press / /ENTER. This unit cannot receive HD Radio™ signals (digital terrestrial radio).
01GB00VPAB222.book Page 8 Friday, January 20, 2006 6:37 PM 5 Press or Holding down continuously. to tune in the desired station. or will change the frequency Tuning to Preset Stations • “DIGITAL” is displayed when a digital radio station is received. 1 Manual Storing of Station Presets Changing Stations by the Commander 1 2 Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold seconds. /MENU/FUNC.
01GB00VPAB222.book Page 9 Friday, January 20, 2006 6:37 PM Changing the Display (HD Radio mode only) Text information, such as Station name, Song title, Artist, etc., is displayed while receiving a digital radio station. 1 Press and hold seconds. Other Useful Features /MENU/FUNC. for at least 2 The FUNCTION screen is displayed. 2 Press the joystick up or down to select the INFO., then press / /ENTER. Joystick Each time you perform the above operations, the display changes as shown below.
01GB00VPAB222.book Page 10 Friday, January 20, 2006 6:37 PM Setting the bass center frequency Adjusting the Balance The displayed bass frequency is boosted. (Common to each audio source.) Setting item: FREQUENCY Setting range: 60Hz 80Hz Adjust the sound volume of the left and right speakers. Setting item: BALANCE Setting range: L15 to R15 Adjusting the Subwoofer Level Adjust the volume of the front and rear speakers. Setting item: FADER Setting range: F15 to R15 Adjust the subwoofer output.
01GB00VPAB222.book Page 11 Friday, January 20, 2006 6:37 PM Rear Entertainment Function 3 Press the joystick left or right to select the monitor to be controlled by the remote control. FRONT: The rear entertainment function independently routes different sources to the front and the rear inside a car. For example, while listening to the radio or other audio source in the front, DVD can be enjoyed in the rear with the optional rear monitor and headphones.
01GB00VPAB222.book Page 12 Friday, January 20, 2006 6:37 PM 2 Setup Press the joystick up or down to select GENERAL SETUP, then press the joystick right. The GENERAL SETUP screen is displayed. Display Example for GENERAL SETUP Screen Joystick 3 GENERAL Setup General Setup Operation To display the General mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
01GB00VPAB222.book Page 13 Friday, January 20, 2006 6:37 PM Setting the Time Setting item: CLOCK ADJ Further setting items: HOUR / MINUTE Setting content: 1-12 (0-23)* / 0-59 HOUR: Adjust the hour. MINUTE: Adjust the minute. * The setting content differs depending on the selection in "Setting the Time Display" (page 12). • Pressing and holding the joystick left or right will change the setting item continuously.
01GB00VPAB222.book Page 14 Friday, January 20, 2006 6:37 PM 3 Press the joystick up or down to select the desired item. Setting items: IN-INT MUTE / NAV. / GUIDE MIX / NAV. MIX LV / FACT SYS SET / FACT SYS LV / FACT SYS DET / FACT SYS MIX / F.SYS MIX TYP / F.SYS INT CH. / REMOTE SEL.*1 / AUX IN-1(2,3) / AUX IN1(2,3) NAME / AUX IN-1(2,3) LEVEL / MONITOR-1 / MONITOR-2 / VISUALIZER / ILLUM COLOR / CMNDR LIGHT. / DIMMER / ADF /SCREEN ADJ / SUBW*2 *1 Refer to "Rear Entertainment Function" on page 11.
01GB00VPAB222.book Page 15 Friday, January 20, 2006 6:37 PM Setting the Interrupt Type of the Speaker Input Voice Navigation Audio Interruption Volume Adjustment The following explanation is how to set the voice interrupt type of the speaker input. When the navigation voice guidance is made to interrupt, set to DEMAND, and the telephone voice is made to interrupt, set to MUTE, these are recommended.
01GB00VPAB222.book Page 16 Friday, January 20, 2006 6:37 PM • The adjustment is available when ON is set in "Setting the AUX Mode" (page 15). Connecting the Rear Monitor If the rear monitor is connected, make the following each setting Setting of the External Monitor Output Set it to ON when you use the rear entertainment function (page 11). Setting items: MONITOR-1, 2 Setting contents: OFF / ON By setting the connected external monitor to ON, the remote control will be usable.
01GB00VPAB222.book Page 17 Friday, January 20, 2006 6:37 PM Adjusting the display position Depending on the connected monitor, the display may move out of position. During touch panel operation, if the position between the display on the LCD and the display of the touch panel does not match, adjust the display position. Setting items: SCREEN ADJ Setting content: CD/MP3/WMA Operation (Optional) Adjustment if a monitor not compatible with touch panel operation is connected.
01GB00VPAB222.book Page 18 Friday, January 20, 2006 6:37 PM 5 Press or to select the desired track. Returning to the beginning of the current track: Press . Fast reverse: Press and hold Fast forward: Press and hold . / Press and hold seconds. / /ENTER. /ENTER again will resume playback. • CD playback information (track no., text etc.) will be displayed on the monitor during playback. • MP3/WMA playback information (folder no., file no., tag information, etc.
01GB00VPAB222.book Page 19 Friday, January 20, 2006 6:37 PM MP3/WMA mode: RPT: RPT FLD: RPT DISC: OFF: When 3 Only a file is repeatedly played back. Only files in a folder are repeatedly played back. A disc is repeatedly played back. Repeat mode off REPEAT is displayed Press / /ENTER. DVD/Video CD Operation (Optional) The repeat mode is changed.
01GB00VPAB222.book Page 20 Friday, January 20, 2006 6:37 PM To display the DVD mode screen To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again.
01GB00VPAB222.book Page 21 Friday, January 20, 2006 6:37 PM Displaying the Top Menu Screen (DVD only) With a DVD having two or more titles, a top menu screen will appear. Press Chapter/Track/Title Repeat Playback Use this function to play the disc’s titles, chapters or tracks repeatedly. 1 /MENU/FUNC. on the DVD mode main screen. • To perform necessary operations, see “If a menu screen appears” on page 20. Changing Discs (only when DVD changer is connected) or /MENU/FUNC.
01GB00VPAB222.book Page 22 Friday, January 20, 2006 6:37 PM Video CDs with multiplex audio 1 Press and hold seconds. Switching from the disc menu /MENU/FUNC. for at least 2 The FUNCTION screen is displayed. 2 Press the joystick up or down to select AUDIO, then press / /ENTER. The left and right channels will be output as shown in the figure below.
01GB00VPAB222.book Page 23 Friday, January 20, 2006 6:37 PM SAT Radio Receiver (Optional) Joystick 4 Press / /ENTER to select the channel tuning. Each time it is pressed, the tuning mode is changed. channel number tuning channel name tuning 5 Press or to select the desired channel. Holding down continuously. or will change channels • When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control.
01GB00VPAB222.book Page 24 Friday, January 20, 2006 6:37 PM SIRIUS Radio: Storing Channel Presets 1 Press and hold /MENU/FUNC. for at least 2 seconds after selecting a desired band. The FUNCTION screen is displayed. 2 *1 Channel name, category, song name, etc., are displayed in one screen. *2 XM mode only: The information display appears when ON is set in “Setting the Auxiliary Data Field Display” (page 17). 3 Press the joystick up or down to select PRESET MEMORY, then press the joystick right.
01GB00VPAB222.book Page 25 Friday, January 20, 2006 6:37 PM Category/Channel Search Function iPod® (Optional) You can search for programs by Category or Channel name. 1 Press /MENU/FUNC.. The Category Search screen is displayed. 2 Press the joystick up or down to select your desired category. Joystick To receive the category directly 1 Press / /ENTER. The first channel of the selected category is tuned.
01GB00VPAB222.book Page 26 Friday, January 20, 2006 6:37 PM • If a song is playing on the iPod when it is connected to the VPA-B222, it will continue playing after the connection. • If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the adapter. Therefore, a maximum of 250 characters is recommended. The maximum number of characters for the head unit is 64 (64 byte). • Some characters may not be correctly displayed.
01GB00VPAB222.book Page 27 Friday, January 20, 2006 6:37 PM To play back the album directly 3 1 Press / /ENTER. Songs in the selected album are played back. Press the joystick up or down to select the M.I.X. mode, then press / /ENTER. M.I.X. ALBUM: • Selecting ALL and pressing / /ENTER plays back all songs from the beginning. • Selecting ALL and pressing the joystick right will change to the SONG search screen.
01GB00VPAB222.book Page 28 Friday, January 20, 2006 6:37 PM Navigation System (Optional) Map Screen Function Displaying the Current Position 1 Press NAV./POS. while displaying the map screen. The current position screen is displayed. Scrolling the Map 1 Press the joystick. The map scrolls in the direction the joystick is pressed. Joystick Changing the Map Scale 1 Press or . Each press of the button changes the map scale. Pressing and holding changes the scale continuously.
01GB00VPAB222.book Page 29 Friday, January 20, 2006 6:37 PM TV Operation (Optional) To activate your TV unit: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake.
01GB00VPAB222.book Page 30 Friday, January 20, 2006 6:37 PM Auxiliary Device (Optional) Operating Auxiliary Devices (Optional) To operate devices connected to the AUX terminals of VPA-B222, follow the procedure described below. WARNING It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. 1 Press SOURCE/POWER. The source selection screen is displayed.
01GB00VPAB222.book Page 31 Friday, January 20, 2006 6:37 PM Factory System Operating Factory System (Speaker Input mode) HDD Player Operation (Optional) The car’s system (standard CD player, etc.) can be selected as a source. 1 Press SOURCE/POWER. The source selection screen is displayed. 2 Press the joystick up or down to select the FACTORY SYS mode, then press / /ENTER. The speaker input screen is displayed.
01GB00VPAB222.book Page 32 Friday, January 20, 2006 6:37 PM External Audio Processor (Optional) Adjustment Procedure for Dolby Surround Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.
01GB00VPAB222.book Page 33 Friday, January 20, 2006 6:37 PM Setting the Speakers 1 2 Check that Defeat mode is off (page 10). Press and hold MUTE/RTN/SETUP for at least 2 seconds. The SETUP screen is displayed. 3 Press the joystick up or down to select AP SETUP, then press the joystick right. The AP SETUP screen is displayed. 4 5 Press the joystick up or down to select SPEAKER SEL, then press the joystick right. Press the joystick left or right to set the connected speaker.
01GB00VPAB222.book Page 34 Friday, January 20, 2006 6:37 PM 8 Press the joystick up or down to select the desired item, then press the joystick left or right to adjust the crossover. FREQUENCY: Adjust the H.P.F. or L.P.F. cutoff frequency. The adjustable bands differ according to the channel (speaker). LEVEL: Adjust the H.P.F. or L.P.F. level. Adjustable level: -13 to 0 SLOPE: Adjust the H.P.F. or L.P.F. slope. Adjustable slope: OFF/-6/-12/-18/-24/-30 5.1ms 0.5m 2.
01GB00VPAB222.book Page 35 Friday, January 20, 2006 6:37 PM Phase Switching 1 2 Check that the Defeat mode is off (page 10). Press and hold MUTE/RTN/SETUP for at least 2 seconds. The SETUP screen is displayed. 3 Press the joystick up or down to select AP SETUP, then press the joystick right. The AP SETUP screen is displayed. 4 5 6 7 screen. • When the speaker is set to the “OFF” mode, the graphic equalizer for that speaker cannot be set. Refer to “Setting the Speakers” (page 33).
01GB00VPAB222.book Page 36 Friday, January 20, 2006 6:37 PM 10 Press MUTE/RTN/SETUP to return to the previous screen. • When the speaker is set to the “OFF” mode, the parametric equalizer for that speaker cannot be set. Refer to “Setting the Speakers” (page 33). • It is not possible to adjust the frequencies of adjacent bands within 7 steps. • Check the playable frequency ranges of the connected speakers before making the equalizer adjustments.
01GB00VPAB222.book Page 37 Friday, January 20, 2006 6:37 PM Setting of Dolby Digital 1 2 Check that Defeat mode is off (page 10). Press and hold MUTE/RTN/SETUP for at least 2 seconds. The SETUP screen is displayed. 3 Press the joystick up or down to select AP SETUP, then press the joystick right. The AP SETUP screen is displayed. 4 Press the joystick up or down to select MULTI CH SET, then press the joystick right. The MULTI CH SET screen is displayed.
01GB00VPAB222.book Page 38 Friday, January 20, 2006 6:37 PM Adjusting the DVD Level Calling up the Preset Memory The volume (signal level) for Dolby Digital, Dolby PL II, DTS and PCM modes can be set. 1 2 • Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the Decode mode is switched. 1 2 3 Check that Defeat mode is off (page 10).
01GB00VPAB222.book Page 39 Friday, January 20, 2006 6:37 PM If MUSIC is selected, the center width can be adjusted with the following operations. This function offers the optimum vocal position by adjusting the center channel position between the center speaker and the L/R speaker (The adjustments established in “Adjusting the acoustic image” (page 37) are ineffective while this function is activated). 1 Press the joystick down to select CENTER WIDTH, then press the joystick left or right to select ON.
01GB00VPAB222.book Page 40 Friday, January 20, 2006 6:37 PM If there is a hierarchical list, will change to the list screen. (page 8) is displayed, and touching Enters the preset number. RTN Returns to the previous screen. Setup Operation “Adjusting the Audio” (page 9), “Rear Entertainment Function” (page 11) and “External Audio Processor (Optional)” (page 32) are operated in the same way.
01GB00VPAB222.book Page 41 Friday, January 20, 2006 6:37 PM CD/MP3/WMA Operation Display example for when connecting a changer Display example for MP3/WMA main screen (REPEAT) , (M.I.X.) (page 18) Changes to the selection screen of M.I.X. or repeat mode. Touch to confirm mode in the selection screen. (DISC SELECT) (page 17) Displays disc selection screen. Touch to confirm disc in the selection screen. (pages 17, 18) Finds the beginning of the current track. Touch and hold to play fast-reverse.
01GB00VPAB222.book Page 42 Friday, January 20, 2006 6:37 PM Display example for DVD menu operation screen SAT Radio Operation Display example for XM main screen Moves an item displayed on the screen. ENT Enters the selected item. RTN Returns to the previous screen. CONTROL Displays the main operation screen. Display example for function screen (page 23) Changes down through channel one by one. Touching and holding changes continuously. CH NO., CH.
01GB00VPAB222.book Page 43 Friday, January 20, 2006 6:37 PM Display example for search screen iPod® Operation Display example for iPod main screen (page 25) Enters the selected category. (page 25) The channel search screen is displayed. Touching on the channel search screen will execute a channel. Display example for function screen (page 25) Finds the beginning of a song. Touching and holding will go fast-reverse. / (page 25) Pauses and plays back.
01GB00VPAB222.book Page 44 Friday, January 20, 2006 6:37 PM TV Operation HDD Player Operation Display example for TV main screen Display example for MM DRIVER main screen (page 29) Decreases channels one by one (Manual mode). Touching and holding searches and receives a channel automatically (Auto seek mode). (page 29) Decreases the preset number one by one. TUNE (page 29) Changes the tuning way (Manual mode, auto seek mode and preset number). (page 31) Finds the beginning of a song.
01GB00VPAB222.book Page 45 Friday, January 20, 2006 6:37 PM Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Basic No function or display. • Vehicle’s ignition is off.
01GB00VPAB222.book Page 46 Friday, January 20, 2006 6:37 PM Indication for SAT Receiver Mode • The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module. - Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module. • Radio is being updated with latest encryption code. - Wait until encryption code is being updated. Channels 0 and 1 should function normally. (XM mode) (SIRIUS mode) • There are no songs in the iPod.
01GB00VPAB222.book Page 47 Friday, January 20, 2006 6:37 PM Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7 – 107.9 MHz 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Usable Sensitivity 530 – 1,710 kHz 22.5 µV/27.0 dB GENERAL Power Requirement 14.
01GB00VPAB222.book Page 48 Friday, January 20, 2006 6:37 PM Installation and Connections Before installing or connecting the unit, please read the following and pages 4 to 5 of this manual thoroughly for proper use. Caution HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. Warning MAKE THE CORRECT CONNECTIONS The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
01GB00VPAB222.book Page 49 Friday, January 20, 2006 6:37 PM 2 Installation Install the tuner on the floor with the supplied flangehead tapping screws (M4 × 14). Flange-head tapping screws (M4 × 14) (Included) Installing the unit Caution • Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. • Do not touch the heat sink as it becomes hot, and may result in injury.
01GB00VPAB222.book Page 50 Friday, January 20, 2006 6:37 PM Mounting the Commander 3 For safe use, make sure of the following: • When the holder cannot be mounted securely with double-sided adhesive tape, mount it by using screws. • Location is stable and film. • Driver's view or operations are not obstructed. • Located where driving can easily be performed (center console, etc.).
01GB00VPAB222.book Page 51 Friday, January 20, 2006 6:37 PM Parking Brake Lead Connection If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
01GB00VPAB222.
01GB00VPAB222.book Page 53 Friday, January 20, 2006 6:37 PM Antenna Extension Cable AV Select Connector Right Front (+) Speaker Input Lead (Gray) Right Front (–) Speaker Input Lead (Gray/Red) When this connector is connected to the optional expansion box (VPE-S431), connect this to the HEAD UNIT terminal of VPE-S431.
01GB00VPAB222.book Page 54 Friday, January 20, 2006 6:37 PM System Example Connect the ALPINE Monitor Monitor (Sold Separately) RGB Input Terminal Monitor B. Box (Sold Separately) RGB Cable (Included) Display Output (RGB Output) Terminal Connect a 13P RGB terminal equipped monitor using the RGB cable supplied with the unit. RGB Cable (Included) Connect a Monitor of another manufacturer Monitor (Sold Separately) Video Input Terminal Monitor B.
01GB00VPAB222.book Page 55 Friday, January 20, 2006 6:37 PM Connect the Ai-NET compatible audio processor, Navigation system, DVD player and changer.
01GB00VPAB222.book Page 56 Friday, January 20, 2006 6:37 PM When Connecting External Equipment VPA-B222 To Video Output terminal TV Tuner, VCR or DVD Player (DVE-5207) that is not compatible with Ai-NET (Sold Separately) To Audio Output terminal (White/Brown) REMOTE OUT REMOTE IN (White/Brown) System Switch AUX Video/Audio Input Terminal When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position.
01GB00VPAB222.book Page 57 Friday, January 20, 2006 6:37 PM Connect an expansion box (VPE-S431), DVD Player, DVD Changer or a Touch Panel-compatible Monitor. VPA-B222 To AUX Input (AUX IN 1) Terminals DVD PLAYER (DVA-5210, etc.) (Sold separately) EXPANSION BOX (VPE-S431) (Sold separately) To AUX Input (AUX IN 2) Terminals To AUX Output Terminals DVD CHANGER (Sold separately) M.CONT (White/Pink) M.
01GB00VPAB222.book Page 58 Friday, January 20, 2006 6:37 PM Connect the car system (standard audio system, etc.).
01ES00VPAB222.book Page 62 Friday, January 20, 2006 7:03 PM 01ES08VPAB222.