R PXA-H900 Multimedia ManagerTM Guide for Installation and Connections English Guide d’installation et de connexions Français Guía de instalación y conexiones Español Español Italiano Svenska
PRECAUTIONS GUIDE FOR INSTALLATION AND CONNECTIONS • Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER’S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new PXA-H900 will give you many years of listening enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. Points to Observe for Safe Usage • Read this manual carefully before starting operation and use this system safely.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections.
Precautions • Be sure to disconnect the cable from the (–) battery post before installing your PXA-H900. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system. • When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer).
Contents PRECAUTIONS 2 Accessories 6 Installation 7 Connections 12 Examples of system expansion 14 Installing with wires only (no terminals) 18 IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit. SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE: To prevent external noise from entering the audio system.
Accessories Ai-NET cable (6m) Display cable (6m) Stand Microphone Terminal board cover Connection Cable Spacer Bracket Spare fuse (7.5A) Hexagonal wrench (M2.
Installation • Mounting the display 1. Remove the face plate. Face plate 2. Use a screwdriver, etc., to remove the lock pin, then take out the inner case. Inner case Lock pin 3. Mount the display using the included screws. Bracket Spacer Display Pan screw (M3 x 5) x 2 4. Mount the formerly removed inner case onto the dashboard, then also mount the display unit.
< JAPANESE CAR> 1. After step 2 on page 7, remove the included side bracket. Side bracket Side bracket 2. Mount the display using the included screws. Bracket Spacer Display Pan screw (M3 x 5) x 2 3. Once the spacer and bracket are mounted on the display, securely mount the bracket that was removed from the vehicle to the display.
• Mounting with the flush mount 1. Make holes approximately 178 (width) by 50 (height) mm in size in the dashboard, etc. WARNING: When making holes, be careful not to damage pipes, tanks, electric wires, etc. Doing so could lead to accidents or fire. 2. After step 2 on page 7, remove the included side bracket. Side bracket Side bracket 3. Remove the spacer from the bracket. Bracket Spacer 4. Mount the spacer on the display using the included screws. Spacer Display Pan screw (M3 x 5) x 2 5.
• Mounting the base unit 1. Decide on the place of installation. • The trunk room, etc., is the best place. 2. Mark the positions of the mount screws at the place of installation. 3. Use a drill to make holes 3 mm in diameter or smaller. WARNING: When making holes, be careful not to damage pipes, tanks, electric wires, etc. Doing so could lead to accidents or fire. 4. Securely mount the unit using the four included tapping screws (M4 x 14).
• Mounting the remote control unit holder • If the remote control unit is exposed to direct sunlight, remove it from the holder and store it in the glove compartment. • If the holder cannot be securely fastened in place with the Velcro, install it using screws. Remote Control Remote Control Holder Screw for mounting remote control unit holder (M2.9 x 20) Velcro tape Console box, etc. WARNING: Do not install the product near the passenger seat’s airbag.
• Basic Connections Diagram < Ceiling > Dolby Digital Indicator Lights white during Dolby Digital decoding. NOTE: Normally the various indicators are lit blue. PRO LOGIC Indicator Lights white during Dolby Surround decoding. HDCD Indicator Lights white during HDCD decoding. DTS Indicator Lights white during DTS decoding. MPEG Indicator Lights white during MPEG2 decoding. Note: Remove the 2 screws marked ★ using the included hexagonal wrench (M2.6). PC CONTROL MIC.
< Side Panel > Cord specifications Connect to: • Head unit input terminal (optical digital input) Used for system expansion (Ai-NET head unit, etc.). Connect to an Ai-NET product using an optical fiber cable. • Changer input terminal (optical digital input) Used for system expansion (Ai-NET changer, etc.). Connect to an Ai-NET product using an optical fiber cable. • DVD player input terminal (optical digital input) Used for system expansion (DVD player, etc.).
Examples of system expansion • PXA-H900 + CDA-7990 Head Unit + CD Changer + External Amplifier Fiber Optic Cable (Sold Separately) Input Side CD CHANGER DVD DIGITAL1 DIGITAL2 DIGITAL3 RCA INPUT ANALOG 1 (L) Ai-NET IN ANALOG2 CHANGER IN ANALOG3 INPUT DISPLAY (R) Fiber Optic Cable (Sold Separately) ★ ★★ Ai-NET Cable (Included with CD Changer) Ai-NET Compatible CD Changer Ai-NET Cable (Included) Output Side CENTER SUBWOOFER REAR FRONT LOW FRONT MID FRONT HIGH (L) FUSE 7.
• PXA-H900 + Ai-NET Compatible Head Unit + CD Changer + External Amplifier Fiber Optic Cable (Sold Separately) ★★ Input Side CD CHANGER DVD DIGITAL1 DIGITAL2 DIGITAL3 RCA INPUT ANALOG 1 (L) Ai-NET IN ANALOG2 CHANGER IN ANALOG3 INPUT DISPLAY (R) Fiber Optic Cable (Sold Separately) ★ Ai-NET Cable (Included with CD Changer) ★★★ Ai-NET Cable (Included) Ai-NET Compatible CD Changer Output Side CENTER SUBWOOFER REAR FRONT LOW FRONT MID FRONT HIGH (L) FUSE 7.
• PXA-H900 + Head Unit + Video Deck etc. + External Amplifier • For connecting a head unit with which Ai-NET connections are not possible. Input Side CD CHANGER DVD DIGITAL1 DIGITAL2 DIGITAL3 RCA INPUT ANALOG 1 (L) Ai-NET IN ANALOG2 CHANGER IN ANALOG3 INPUT DISPLAY (R) Ai-RCA Conversion Cable (Sold Separately) PIN connection cable TV Tuner, Video etc.
• PXA-H900 + CDA-7990 Head Unit + DVD Player + CD Changer + Navigation System + TV Monitor + External Amplifier Fiber Optic Cable (Included with DVD Player) CDA-7990 Head Unit Fiber Optic Cable (Included with DVD Player) Input Side CD CHANGER DVD DIGITAL1 DIGITAL2 DIGITAL3 RCA INPUT ANALOG 1 (L) Ai-NET IN ANALOG2 CHANGER IN ANALOG3 Ai-NET Cable (Included with DVD player) INPUT DISPLAY (R) Fiber Optic Cable (Sold Separately) ★ Ai-NET Cable (Included with CD Changer) ★★ Ai-NET Compatible CD Change
Installing with wires only (no terminals) The hexagonal screw must be used when installing with wires only (without terminals). We strongly recommend having connections made by your store of purchase. If you wish to make connections yourself, read the instructions below carefully and be sure to connect properly. • When making connections, be sure to use the included hexagonal screw and hexagonal wrench. • For safety, leave the power cord unplugged until all connections have been completed.
R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.