Owner`s manual

16-EN
RCA INPUT
ANALOG 1
Ai-NET IN
ANALOG2
CHANGER IN
ANALOG3
CD
DIGITAL1
CHANGER
DIGITAL2
DVD
DIGITAL3
DISPLAY
INPUT
(L)
(R)
FUSE
7.5A
BATTERY
POWER SUPPLY
GND
CENTER
GUIDE INPUT
SUBWOOFER REAR FRONT LOW FRONT MID FRONT HIGH
OUTPUT
(L)
(R)
Input Side
Output Side
PIN connection cable
PIN connection cable
Remote OUT Cable
★
Remote OUT Cable
Remote ON Cable
Illumination Cable
Guide Control Cable 1
Guide Control Cable 2
Head Unit
Grounding Cable (Sold Separately)
Battery Power Cable (Sold Separately)
Ai-RCA Conversion Cable
(Sold Separately)
TV Tuner,
Video etc.
Audio
Output
Blue/White
Blue/White
Blue
Orange
White/green
White/green
Front Tweeter Output (L)
Front Tweeter Output (R)
Front Mid Range Output (L)
Front Mid Range Output (R)
Front Mid Bass Output (L)
Front Mid Bass Output (R)
Rear Output (L)
Rear Output (R)
Subwoofer Output (L)
Subwoofer Output (R)
Center Output
To External Amplifier
Not used
To the vehicle's small light cable
Not used in this system
To External Amplifier Remote ON Cable
Connect to a metal part of
chassis body with a screw.
12V
NOTES:
• When using the PXA-H900 with a non-Ai-NET head unit, +12V is required on this line to turn on the equalizer. If your
head unit does not have a remote-on or power-antenna turn-on wire, an SPST switch must be connected between an
ignition source and this terminal. The PXA-H900 can then be turned on using this switch.
The PXA-H900 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to
take full advantage of all the features and functions of this processor.
• For the ground cord (sold separately) and battery power cord (sold separately), pass the wires through the included
terminal board cover before connecting them to the PXA-H900. After this, mount the terminal board cover on the
PXA-H900.
• If the ground cord (sold separately) and battery power cord (sold separately) are only wires (if they do not have
terminals), refer to “Installing with wires only (no terminals)” (page 18) to install.
• PXA-H900 + Head Unit + Video Deck etc. + External Amplifier
• For connecting a head unit with which Ai-NET connections are not possible.