Operation Manual

11-EN
01GB05CDA-9854R.fm
ALPINE CDA-9852R 68-04123Z53-B (EN)
Playback
1 Press (OPEN).
The front panel will open.
2 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the CD mode.
The mode will change every time the button is pressed.
TUNER DISC CHANGER* TUNER
* Only when the CD changer is connected
3 While playing back MP3/WMA, press or to
select the desired folder.
Pressing and holding or will change folders
continuously.
4 Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5 To pause playback, press / .
Pressing / again will resume playback.
6 After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• If the HDA-5460 model is connected to the unit, some operations (for
example changing the source, selecting the file by holding buttons up
or down, etc.), can be carried out on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
• Press TITLE to switch the display. See “Displaying the Text”
(page 16) for information about display switching.
• If the folder number or file number is three digits, F or T becomes
numbers of hundred rank.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
*
1
When a CD changer is connected
• If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
MP3/WMA mode :
*
2
When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press FUNC. to illuminate the “FUNC”
indicator, and go to the step above within 10 seconds.
CD/MP3/WMA
SOURCE/POWER
Rotary
encoder
4 5
FUNC.
TITLE
/
(OPEN)
MODE
F01 T03 10'15
Folder number
display
File number
display
Elapsed time
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: A disc is repeatedly played back.
01GB00CDA-9854R.book Page 11 Thursday, November 10, 2005 2:42 PM