Operation Manual

19-EN
01GB05CDA-9854R.fm
ALPINE CDA-9852R 68-04123Z53-C (EN)
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Select the AUX name by pressing or , then press MODE.
Then turn the Rotary encoder.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX mode
and then press BAND to select your desired device.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• Rear pre-amplifier output is only available on the CDA-9854R.
• No sound is produced by the system when the power output is set to
OFF.
Setting the External Digital Input (DIGITAL AUX)
When an ALPINE Ai-NET compatible digital audio processor and a
DVD player (DVE-5207) not compatible with Ai-NET are connected,
set D-AUX to ON to enjoy 5.1-channel surround sound.
• Press SOURCE/POWER, and select the D-AUX mode, and adjust
the volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player’s power to OFF.
External Device
MUTE ON (Initial setting) / MUTE OFF
AUX IN ON / AUX IN OFF (Initial setting)
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF : Use this mode when the front and rear pre-
amplifier of the unit are used to drive an
external amplifier connected to the speakers.
In this setting, the head unit’s internal amplifier
has no output to drive speakers.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
POWER IC ON : The speakers are driven by the built-in
amplifier.
D-AUX ON / D-AUX OFF (Initial setting)
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
01GB00CDA-9854R.book Page 19 Wednesday, March 8, 2006 5:36 PM