MP3IWMAlAAC CD Receiver CDA-9887 AAC MP3 H3'Radio™ 1JREADY (illD~1m DIGITAL AUDIO I TEXT I ~ '~A~IO..l READY • • OWNER'S MANUAL Please read before using this equipment. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACION Leala antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
Experience . music the way the artist intended Alpine introduces IMPRINT - the world's first technology that thoroughly eliminates in-car acoustic problems that normally degrade sound quality. VISION vs. REALITY All good music starts as an artist's vision. After countless hours of rehearsing, recording and mixing, that vision is ready for us to hear on discs, radio and other media.
ENGLISH Contents Equalizer Presets 13 Setting EQ mode 14 Operating Instructions Adjusting and Storing the Parametric Equalizer Curve 14 WARNING Adjusting and Storing the Graphic Equalizer Curve 14 Recalling the Stored Equalizer Curve 15 WARNING 3 About the Crossover 15 ,CAUTION 3 PRECAUTIONS 3 Adjusting and Storing the Crossover Settings 16 Getting Started Recalling the Stored Crossover Settings 17 About Time Correction 17 Setting the Time Correction Unit 18 Adjusting and Stor
Setting the Subwoofer Channel (SUBW.
Operating Instructions 'WARNING DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. &WARNING &CAUTION This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Never Attempt the Following Correct Handling Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
On handling Compact Discs (CD/CD-R/CD-RW) Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.
3 Getting Started ~ III 0 , lENT Rotary encoder t:. OPEN) ~/RTN SOURCEI • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction.
7 Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode. • Pressing ~ IRTN returns to the previous SETUP mode. • If no operation is performed for 60 seconds, SETUP is canceled.
Presettlng Stations Manually Radio ~/II/ENT 1 Rotary encoder TUNE/A.ME SOURCE/ BAND 2 Select the radio band and tune in a desired radio sta~ion you wish to store in the preset memory. Press and hold, for at least 2 seconds, anyone of the preset buttons (1 through 6) into which you wish to store the station. o ~/ESC Preset buttons (1 through 6) This unit cannot receive HD Radio™ signals (digital terrestrial radio).
Frequency Search Function CD/MP3/WMA/AAC You can search for a radio station by its frequency. 1 Press and hold ~/ESC for at least 2 seconds in Radio mode to activate Frequency search mode. 2 Turn the Rotary encoder to select the desired frequency. 3* Press * ~/II/ENT to ~ III lENT Rotary encoder .z:::: (OPEN) SOURCEI~ receive the selected frequency. Operation is not required during HD Radio reception. • Press and hold ~IESC for at least 2 seconds in the search mode to cancel.
5 To pause playback, press ~/II/ENT. Pressing ~/II lENT again will resume playback. 6 After pressing ~ (OPEN) to open the front panel, press ~ to eject the disc. • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • If the CD does not eject, press and hold ~ for at least 2 seconds. • The CD-player can play discs containing audio data, MP3 data, WMA data and AAC data.
Searching from CD Text Quick Search Tracks can be searched and played using the CD text on the disc. If a disc is not compatible with text, or a disc is in the changer, searches can be made by track number. You can search for tracks (files). 1 Press Press and hold ~ lESe for at least 2 seconds in the CD/Changer/MP3IWMAlAAC mode to activate Quick Search mode. 2 Turn the Rotary encoder to select a desired track (file). ~/ESe during play. This will set the search mode.
Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software's documentation. The playback order of the folders and files is as follows. MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps WMA Sampling rates: 48 kHz, 44.
Turning MultEQ on/off Sound Setting ~ IESC Rotary encoder (AUDIO) ~/II/ENT, SOURCEI BAND MultEQ, developed by Audyssey Labs, automatically corrects the audio for the listening environment. The system is optimized for selected positions in the vehicle. To accomplish this, MultEQ must take measurements of the vehicles response characteristics. For details on the set up procedure, consult your authorized Alpine dealer. ~ Press MultEQ to select ON/OFF mode. o ~/RTN A. SEL FUNC.
6 Setting EQ mode f This setting gives you a choice of 5-band parametric, or 7-band graphic equalizer. 1 Press and hold FUNC./SETUP for at least 2 seconds to setup the Selection mode. 2 Turn the Rotary encoder to select AUDIO mode, and then press ~ III lENT. Bluetooth H GENERAL H TUNER* H Bluetooth * Press SOURCE/
4 Turn the Rotary encoder to adjust the level. Adjustable output level: -6 to +6 dB 5 To adjust another band, repeat steps 3 and 4, and then adjust all bands. 6 When the setting has been completed, select any one of the preset buttons (1 through 6), press and hold the desired preset buttons for at least 2 seconds to store the adjusted contents. 7 Turn the Rotary encoder to select PROTECT YES/NO, and then press ~/II/ENT to store the adjusted contents.
When Maker's is selected, refer to "Setting the Response Slope for the High Range Speaker (TW Setup)" (page 24). *2 When User's is selected, refer to "Setting the Response Slope for the High Range Speaker (TW Setup)" (page 24). *1 Level adjusting (0 to -12 dB) Output frequency range -j I .;- I~ - Slope FLAT i\~ ~~~;e-~~jUstlng 5 Press SOURCEI to adjust the slope. Adjustable slope: FLAT*, 6 dB/oct., 12 dB/oct., 18 dB/oct., 24 dB/oct.
6 Turn the Rotary encoder to adjust the output level. Adjustable output level: -12 to 0 dB. 7 Repeat steps 3 to 6 to make adjustment to the other bands. Adjust the time correction level of the front left speaker to a high value and the rear right to zero or a low value. • While adjusting the X-over, you should consider the frequency response of the connected speakers. • The stored contents are not deleted even when resetting the unit or disconnecting the battery.
Time Difference Table Delay Number Distance (cm) Distance (inch) Delay Number Distance (cm) Distance (inch) 0 0.0 0.0 51 173.4 68.3 1 3.4 1,3 52 176.8 69.7 2 6.8 2.7 53 180.2 71.0 3 10.2 4.0 54 183.6 72.4 4 13,6 5.4 55 187.0 73.7 5 17.0 6.7 56 190,4 75,0 6 20.4 8.0 57 193.8 76.4 7 23.8 9.4 58 197.2 77,7 8 27,2 10.7 59 200.6 79.1 9 30,6 12.1 60 204.0 80.4 10 34.0 13.4 61 207.4 81.7 11 37.4 14.7 62 210.8 83.1 12 40.8 16.
4 5 6 7 Turn the Rotary encoder to adjust the distance (0.0 to 336.6cm). Repeat steps 3 and 4 to set another speaker. When the setting has been completed, select any one of the preset buttons (1 through 6), press and hold the desired preset buttons for at least 2 seconds. Turn the Rotary encoder to select PROTECT YES/NO, and then press ~ III lENT to store the adj usted contents. PROTECT YES (Initial setting) H After setting, press and hold ~/ESC for at least 2 seconds to return to normal mode.
The display in MP3IWMAJAAC mode: Other Functions File Name Song Name TITLE *3 Folder No.lFile No.lElapsed Time Displaying the Text File Name Folder No.lFile No.lElapsed Time Displayed during playback ofa disc with CD Text. The root folder is displayed as blank. *3 ID3 tag/WMA tag If an MP3/wMAIMC file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored.
Indicator/ Mode CD Mode MP3/WMA/ AAC Mode SAT RADIO/HD RADIO Mode iPod Mode II - Folder Name being displayed I!i - Song Name being displayed Song Name being displayed Song Name being displayed - Artist Name being displayed Artist Name being displayed Artist Name being displayed - Album Name being displayed Album Name being displayed (HD Radio only) Album Name being displayed - File Name being displayed --I:;i .
Displayed only when INT Mute is OFF. Refer to "Setting the Time and Calendar" (page 7). *3 Displayed only when Bluetooth IN is OFF. ~ Displayed only when AUX IN is ON. *5 Displayed only when Subwoofer is ON, and no external audio processor is connected. *6 Refer to "Equalizer Presets" (page 13). *7 Refer to "Setting the Time Correction Unit" (page 18). *8 Displayed only when 2.2ch (3WAY) is set. *9 Refer to "Setting EQ mode" (page 14). *10 When SAT/HD Radio is connected.
Playing MP3IWMAJAAC Data (Play Mode) CD-DA (Initial setting) / CDDA&MP3IWMA This unit can play back CDs containing both CD and MP3IWMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and the MP3IWMAI AAC data, playback starts from the CD data portion of the disc.
AUDIO is selected on the setup main menu in step 2. DISPLAY is selected on the setup main menu in step 2. Subwoofer On and Off Changing Lighting Color (Illumination) Subwoofer ON (Initial setting) / Subwoofer OFF Illumination TYPE 1(Initial setting) / TYPE 2 / TYPE 3/ TYPE 4 / TYPE 5 When the subwoofer is on, perform the steps below to adjust the subwoofer output level. In the normal mode, press the Rotary encoder repeatedly to select the SUBWOOFER mode.
Switching the Character Font (Font Select) SAT Radio Receiver (Optional) Font Select TYPE 1 (Initial setting) / Font Select TYPE 2 Two types of font can be selected. You can select the font type you like. Switching the Animation Display Type (BGV Select) BGV Select OFF (Initial setting) / BGV Select TYPE 1 / TYPE 2/ TYPE 3/ TYPE 4 Rotary encoder ~ III lENT SOURCE/cD BAND You can select your favorite animation display for background from 4 types. .....
4 Press ~ or ~ to select the desired channel. Storing Channel Presets Holding down ~ or ~ will change channels continuously. • When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENTER on the remote control within 5 seconds to receive the Channel.
6 Press FUNC./SETUP to cancel the function mode. • When you want to store but the memory area is filled, "MEMORY FULL" is displayed. If you want to replace the team after you have peiformed the procedure in step 4, tum the Rotary encoder to select "REPLACE YES," and then press ~ /11 lENT. 1 Press and hold FUNC./SETUP for at least 2 seconds to enter the SETUP mode. 2 Turn the Rotary encoder to select a TUNER item, and then press ~/II/ENT. 3 4 5 6 Turn the Rotary encoder to select Game Alert, and .
4 Turn the Rotary encoder to select the desired Channel Name, and then press ~/II/ENT. • While in Category Search mode, press ~ IRTN to return to the selecting search mode. • The Search mode is canceled if you press and hold ~/ESC for at least 2 seconds, or no operation is peiformed for 10 seconds in Category Search mode. • IfALERT interruption occurs in the search mode, the search mode is canceled.
SIRIUS mode: iPod® (Optional) Category Name Rotary encoder ~/II/ENT SOURCEI..... ~ ~ 4 5 GO 6 Channel No.lChannel Name When ADF is turned OFF, this information is not displayed (see "Setting the Auxiliary Data Field Display" on page 29). Displayed in 1 line when text amount is small. *2 When the "Scroll Setting" (page 24) is set to "Auto", the display cannot be switched by pressing TITLE. The display contents switch alternately. *3 Displayed only during instant replay.
Searching for a desired Song Quick Search An iPod can contain hundreds of songs. By using file tag information and keeping these songs organized in playlists, this unit's search functions will ease song searches. Each music category has its own individual hierarchy. Use the Playlist! Artist!Album/SonglPodcast/Genre/Composer search mode to narrow searches based on the table below~ You can search a song from all songs in the iPod without selecting an album, artist, etc.
Select Playlist/Artist/Album/Podcast/ Genre/Composer Playlist!Artist!AlbumIPodcast!Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed. Repeat Play Only Repeat One is available for the iPod. Repeat One: A single song is repeatedly played back. 1 Random Play Shuffle (M.I.X.) 2 Shuffle Albums: The songs on each album are played back in proper order. Upon completion of all the songs on the album, the next album is selected randomly.
Playing MP3 Files with the CD Changer (Optional) ~/II/ENT SOURCEI BAND If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit. ~~IIJo FUNC.lSETUP Select buttons (1 through 6) 1 Press SOURCE/ to switch to the MP3 Changer mode. 2 Press anyone of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. 3 To pause playback, press ~/II/ENT. Pressing ~/II lENT again will resume playback.
Remote Control ® Band Button Radio mode: BAND Button Press this button and the band will change. Changer mode: To switch the changer. ® ~ UP Button Radio mode: SEEK (UP) button CD/iPod mode: Press this button to advance to the beginning of the next track. @) ~ Button Radio mode: Pressing this button will select, in descending order, stations programmed into the radio's presets as shown below. [§] -7 00 ...
Battery Replacement Applicable battery: Use two "AAA" sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing in the direction of the arrow. 2 Replacing the battery Insert the batteries, observing the polarities as illustrated. + 3 Closing the cover Slide the cover as illustrated until a click is heard. Controllable With Remote Control Point the remote control transmitter at the remote control sensor.
Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. No function or display. Vehicle's ignition is off.
Error 01 High Temperature • Protective circuit is activated due to high temperature. - The indication will disappear when the temperature returns to normal operating range. No Disc • No CD is inserted. - Insert a CD. • Although a disc is inserted, "No Disc" is displayed and the unit does not start to play or eject the disc. - Remove the disc by following these steps: Press the ~ button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer. Error • Mechanism error.
Specifications OFF AIR I ACQUIRING (XM mode) SIGNAL I FM TUNER SECTION (SIRIUS mode) • The channel currently selected has stopped broadcasting. - Select another channel. 1------------1 • The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed.
Installation and Connections Before installing or connecting the unit, please read the following and ~ages 3 to 5 of this manual thoroughly for proper use. ~Warning MAKE THE CORRECT CONNECTIONS. ~Caution HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
Installation 2 Hex Nut (M5) Screw Caution Do not block the unit's fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. Metal Mounting Strap Air ventilation hole Ground Lead Chassis ~~ V Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis.
Connections @ ~-----~-€G To iPod JAntenna c:::e=:J~---- Blue Blue/White ® REMOTE TURN-ON @ Orange IGNITION ® Yellow BATTERY (J) Black GND ® @ @ e @ e I 22 [J *1 3WAYS e Ai-NET *1 §1 Ignition Key + ~ e Speakers @ .
CD ® Antenna Receptacle @ Left Rear (+) Speaker Output Lead (Green) Power Antenna Lead (Blue) @ Left Rear (-) Speaker Output Lead (Green/Black) Connect this lead to the +B terminal of your power antenna, if applicable. @ Left Front (-) Speaker Output Lead (White/Black) @ Left Front (+) Speaker Output Lead (White) • This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.
The X-Over Switch position for a 4.2ch system (frequency range is divided between highs for front/rear and lows for the Subwoofer). The position of the X-Over switch: F/RISub-W The X-Over Switch position for a 2.2ch system whose frequency range is divided among the highs (Rear), mids (Front), and lows (Subwoofer).
ffffMLPINE® GARANTIE LIMITEE Fideles a leur engagement de ne fournir que des produits de qualite, ALPINE ELECTRONIQUE DE L'AMERIQUE, INC. et ALPINE ELECTRONIQUE DU CANADA, INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggerons de Ie lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter I'un de nos concessionnaires ou appeler directement Alpine aux numeros listes ci-dessous.
ffffMLPINE® LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. • PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada.
To Cllltom.s!HlnwliI an ••d8nIA ratted. de rUlilisatlUPl informaciOn p.alos cli8ntelllnlormazioni per i clentillli kunderl lt3Pllt3p The Owner's Manual has revision as shown here. Die Bedienungsanleitung wird wie folgt erganzt. Le Mode d'emploi a subi les modifications suivantes. El Manual de operacion contiene las revisiones incluidas aqui. English Add a note after steps 4 and 5 (refer to "Adjusting and Storing the Time Correction" ) respectively. 4 Turn the Rotary encoder to adjust the distance (O.
n manuale diistruzioni estato revisionato in base aile indicazioni sotto riportate.. Bruksanvisningen bar den revision som visas hare ~Jijp_llfimrF!liE 0 *JfiPilPJJ=f!WjI]l'iTlE 0 ~ Agglunta dl una nota dopo j puntl 4 e 5 (vedere "Regolazlone e salvataggio deUa correzlone del tempo"). 4 Ruotare II codificatore a rotazione per regolare la distanza. (da 0,0 a 336,6 em). L:::(distanza dall'altoparlante piu lontano) - (distanza dagli altri altoparlanti) Vedere "Tabella differenza di tempo".
ffffblLPINE. Customer Care Registration ~ For easy on-line registration, go to ..www.alpine-usa.com/registration.. Thank you for choosing Alpine! Please register your product with us so we can serve you better. First name: _ II Product purchased Last name: _ 1. 0 Cassette Player 2. 0 CD Player 3. 0 MD Player 4. 0 DVD Player 5. 0 CD Changer 6. 0 Amplifier 7.0 Speaker 8.
I I BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 320 TORRANCE CA POSTAGE WILL BE PAID BY ADDRESSEE ATTENTION MARKETING SERVICES ALPINE ELECTRONICS OF AMERICA INC PO BOX 2859 TORRANCE CA 90509-9939 11.11111 •• 111.1.11.111.1111.1111.1111111.1.111111.
.. HE PAS AFFRANCIIR fII POSTAGE NECESSARY IFMAIED TO III .18 STATES IBRS/CCRI No. 320 INTERNATIONAL BUSINESS REPLY MAIL/REPONSE PAYEE- - TORRANCECA PERrtIT NO. 320 POSTAGE WlL BE PAl BY A'-SSEE ALPINE ELECTRONICS 19145 GRAMERCY PL TORRANCE CA 90501-9876 UNITED STATES OF AMERICA 11.1 •• 11 •••• 1.1.11 •••••• 111.1 ••1•• 1.1 ••• 1.11 ••• 1.1.
