Owner`s manual
Setting the BLUETOOTH Device
Select one
of
5 connected BLUETOOTH compatible devices that you
previously registered.
Setting item: PAIRED
DEV
Turn the
Rotary
encoder
to select a BLUETOOTH
compatible device you want to use (you want to change
connection) and then press
~/II/ENT.
•
If
the connection is successfully changed, "CONNECTED" is
displayed
for
2 seconds and the 0 indicator lights up, then the
display returns
to
the SETUP screen.
•
If
you input the wrong passcode or communications fail, "FAILED"
is displayed.
•
If
you want
to
connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to challge
to.
The PIN code isfixed as "0000".
Setting the Search Mode
You
can set whether this unit can be recognized or not from a
BLUETOOTH compatible device. Normally set this to VISI
MON.
Setting item: VISIBLE M
VISI M ON: Enable recognition of this unit from the
BLUETOOTH compatible device.
VISI M OFF: Disable recognition of this unit from the
BLUETOOTH compatible device.
• Depending
011
the mobile phone, it may be necessary 10 input a
passcode.
For
inplllting the mobile phone's passcode, refer to the
mobile phone's Owner's Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically
or not.
Setting item: AUTO
ANS
AT
ANS ON: When a call
is
received,
it
is
answered
automatically after about 5 seconds.
AT
ANS OFF: When a call is received, it
is
not answered
automatically. Press
...I
to
receive the call.
•
If
the received call selling on the mobile phone is on, the call will be
answered automatically even though this setting is set 10
OFF.
Deleting a BLUETOOTH Device from the list
You
can delete the history
of
a previously connected BLUETOOTH
compatible device.
Setting item: CLEAR
DEV
1 Turn the
Rotary
encoder
to select the BLUETOOTH
compatible device to be deleted and then press
~/II/ENT.
2 Turn the
Rotary
encoder
to select CLEAR YES if
you want to delete and then press
~/II/ENT.
• Selecting CLEAR NO will cancel the selling.
• The registration number 5 is deleted once the ignition key goes from
ACC
10
off.
Displaying the phone service provider name
Setting
item:
SEV
NAME
The service provider name
of
the connected BLUETOOTH compatible
device will be displayed.
If
a BLUETOOTH compatible device is not
connected, "ID UNSENT" will also be displayed.
• Depending on the character type some phone service provider name
cannot be displayed. "ID UNSENT" will also be displayed.
Adjusting the volume for the microphone input
You
can emphasize or weaken the microphone input volume level.
Setting
item:
MIC INPUT
Turn the Rotary encoder to select the desired volume level (0-7).
•
The
selling cannot be adjusted during a phone call. Adjust the selling
before placing a call.
Selecting the output speaker
You
can select the connected speaker
in
car to output the sound signal
of
telephone.
Setting
item:
SPEAKER SL
ALL: The sound be output from all of speakers
in
car.
F-L: The sound only be output from the front left
speaker.
F-R: The sound only be output from the front right
speaker
F-LR: The sound be output from the front left and front
right speaker.
• The selling cannot be adjusted during a phone call. Adjust the selling
before placing a call.
Displaying the firmware version
Setting
item:
FW
VERSION
The current firmware version will
be
displayed.
Updating the firmware
Setting item:
FW
UPDATE
With this setting, the BLUETOOTH firmware update function can be
activated, but other devices and software may be required. For details,
consult ALPINE website.
19-EN