Owner`s manual
USB
Memory
Connection
(Optional)
Rotary
encoder
1
....
~2~45C06
I
..::::..::::-.=
0
c::::J
~8((
I
)}5ll
I
liB
o I.l@
r\
r-..~
~
~
7/
0 o 0 o 0
I
I
~
~
III
lENT Preset
buttons
VIEW
(1
through
6)
~/MUTE
~/ESC
SOURCEI<!>
-----aeS
c:;=t'
....
::::::::::;:J
I I
(S
ODD}:))!
III~
f4
DO
I
f4
\~~l=f'-------,
•
. .
..
@
This
unit
USB
Connection
Terminal
USB
memory
old
Separately)
Connect
USB
memory
1 Open the cover
of
the USB connection terminal.
2 Connect the USB memory directly
to
the USB
connection terminal,
or
via the USB cable.
About
MP3/WMA/AAC
File
of
USB
Memory
Remove
USB
memory
1 Carefully, pull
out
the USB memory from the USB
cable
or
the USB connection terminal.
2 Close the cover
of
the USB connection terminal.
• Change to a source other than the USB memory mode, then remove
the USB memory.
If
the USB memory is removed
in
the USB memory
mode, data may be damaged.
• When removing USB memory, pull it out straight.
• If.vound is not output
or
USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Route the USB cable awayfrom other cables, etc.
• After removing the USB memory, close the cover
of
the USB
connection terminal to prevent dust
or
foreign objects from entering
and causing a malfunction.
Playing
back
MP3IWMAlAAC
MP3NVMA/AAC
files are prepared, then stored
to
a
USB
memory.
This
unit can recognize
at
least
100
folders (including
root
folder) and
100
files per folder stored
in
USB
memory.
Playback may not be performed
if
a
USB
memory exceeds the
limitations described above.
Do
not make a file's playback time more than 1
hour.
Media
supported
This device can play back
USB
memory media.
Corresponding File Systems
This
device supports
FAT
12/16/32 for
USB
memory device.
• Confirmed devices regarding
Made
for iPod.
iPod touch (2nd generation): version 2.2
iPod nano (4th generation): version 1.0.3
iPod classic (120 GB): version 2.01
iPod touch (1st generation): version 2.2
iPod nano (3rd generation): version 2.0
iPod classic (80,
160
GB):
version 1.1.2
iPod nano (2nd generation): version 1.1.3
iPod with video: version
1.3
iPod nano (1st generation): version
1.3.1
• Confirmed
devices
regarding Works with iPhone.
iPhone
3G:
version
2.2
iPhone: version
2.2
• For clarity
in
identifying your model of iPod, please see
Apple's own
document
"Identifying iPod models" at
http://support.apple.com/kb/HT1353.
• This unit does not
support
video
playback
from iPhone/iPod,
even using a video-compatible cable.
•
If
the unit is used with versions of iTunes earlier than 8.1,
correct function
and
performance are not guaranteed.
iPhone/iPod models usable with
this
unit
• Set AUX+ SETUP to OFF when an iPhoneliPod is connected (refer
to "Setting the AUX+ SETUP Mode" on page
17).
• I{you connect an iPhone to this unit, it can be used as an
iPod.
l(you
use iPhone as a hands-free phone, use the unit
in
which the
BLUETOOTHfunction is built.
• Internet and telephone functions
of
iPod touch or iPhone, etc
..
can
also be used when connecting to the unit. However, using these
functions will stop
or
pause the playing songs, at this time do not
operate the unit to avoid a malfunction.
• Do not leave an iPhoneliPod
in
a
car,
as its mechanism is sensitive to
high temperature and humidity conditiom', and damage may result.
An
iPhone/iPod can be connected to this unit
by
using the proprietary
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold
separately). When this unit
is
connected
by
using the cable, the controls
on the iPod are not functional.
Cable (Sold
Separately)
USB
memory
(Sold Separately)
22-EN