Owner`s manual
Playback
1 Press SOURCE/<!> to switch to the iPod mode.
TUNER
~
DISC
~
USB
AUDIO
~
iPod,IIAUX+,2
~
AUX']
~
TUNER
,I
Displayed only when the iPhoneliPod is connected and
AUX+ SETUP is set to
OFF,
refer to "Setting the AUX+ SETUP
Mode" (page
17).
,2
Displayed only when the
AUX
+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
,]
Refer to "Using the Front
AUX
Input Terminal" (page 15).
2 Press
~
or
~
to select the desired song.
Return to the beginning
of
the current song:
Press
~.
Fast backward through current song:
Press and hold
~.
Advance to the beginning
of
the next song:
Press
~.
Fast forward through current song:
Press and hold
~.
3
To
pause playback, press
~/II/ENT.
Pressing
~/II
lENT again will resume playback.
• A song playing on the iPhoneliPod while it is connected to this unit
will continue to playfrom where it was paused after disconnection.
• 1fyou listen to an episode from a selected podcast
or
audiobook, the
episode can be changed by pressing 1
....
or
~
2.
•
An
episode
may
have several chapters, the chapter can be changed
by
pressing
~
or
~.
Searching
for
a
desired
Song
An iPhone/iPod can contain hundreds
of
songs. By using file tag
information and keeping these songs organized
in
playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist!
Artist!
Al
bum/Song/Podcast!Genre/ComposerlAudiobook search mode
to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2 Hierarchy 3
Hierarchy 4
Playlist
Song
-
-
Artist'
Album'
Song
-
Album'
Song
-
-
Song
- -
-
Podcast
Episode
- -
Genre'
Artist'
Album'
Song
Composer'
Album'
Song
-
Audiobook
-
-
-
For example: Searching
by
Artist name
The following example explains how
an
ARTIST search is performed.
Another search mode can
be used for the same operation, although the
hierarchy differs.
1 Press
~/ESC
to activate the search selection mode.
The
"~"
indicator lights up.
2 Turn the
Rotary
encoder
to select the ARTIST
search mode, and then press
~/II/ENT.
PLAYLIST H ARTIST H ALBUM H SONG H PODCAST
H GENRE H COMPOSER H AUDIOBOOK H PLAYLIST
3 Turn the
Rotary
encoder
to select the desired
Artist, and then press
~/II/ENT.
4 Turn the
Rotary
encoder
to select the desired
Album, and then press
~/II/ENT.
5 Turn the
Rotary
encoder
to select the desired
Song, and then press
~/II/ENT.
• After pressing and holding
~/IIIENT
for
at least 2 seconds while
in
each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs
of
the selected hierarchy are played back.
• After selecting [ALL}
in
the search mode with'"
",
press and hold
~/IIIENT
for
at least 2 seconds to play back all songs in the
iPhoneliPod
or
selected search mode.
• While
in
the search mode,
if
you press and hold
~IESC
for
2 seconds,
or
no operation is
performedfor
10 seconds, the search
mode is canceled.
•
1n
the search mode, pressing
~IMUTE
will return to the previous
mode.
• When search is made during
M.1.X.
play, the M.J.X. play mode will be
canceled.
• "NO
SONG"
will be displayed
if
there are no songs in the selected
playlist
in
the PLA YLIST search mode.
• "NO PODCAST" will be displayed
if
there is no podcast data
in
the
iPhoneliPod
in
the PODCAST search mode.
• "NOAUDIOBOK" will be displayed
if
there is no audiobook data in
the iPhoneliPod
in
the AUDIOBOOKsearch mode.
•
1f
"iPod
name"
stored
in
the iPhoneliPod is selected
in
the desired
Playlist search mode, and
~/IIIENT
is pressed, you can search
for
all songs in the iPhoneliPod. Also,
if
you press
and
hold
~/IIIENT
for
at least 2 seconds, all songs
in
the iPhoneliPod are played back.
• Depending on the iPhoneliPod, podcast search is not supported.
•
if
anyone
of
the preset buttons (1 through
6)
is pressed
in
the search
mode, a search can be made quickly by skipping to the specified
location.
For
details, refer to "Direct Search Function" on page 24.
Quick
Search
You
can search a song from all songs
in
the iPhone/iPod without
selecting an album, artist, etc.
1 Press and hold
~/ESC
for at least 2 seconds to
activate the Quick Search mode.
The
"~"
indicator lights up.
2 Turn the
Rotary
encoder
to select a desired song.
The selected song is played
back
immediately.
• Press and hold
~/ESC
for
at least 2 seconds
in
the search mode to
cancel.
Or,
the search mode
is
canceled
if
no operation is performed
for
10 seconds.
•
if
many songs are
in
the iPhoneliPod, it takes time to
searchfor
songs.
•
if
anyone
of
the presetbuttons
(l
through 6) is pressed in the search
mode, a search can be made quickly by skipping 10 the specified
location. For details, refer 10 "Direct Search Function" on page 24.
• This function is inactive during repeat
(r:=J)
playback.
23-EN