Owner's Manual

46-EN
The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. When enabled, the
Parental Control feature requires you to enter a passcode to tune to the
locked channels. You can unlock a channel or change the passcode using
this menu option.
 Setting item: P-LOCK
Setting contents:
CLEAR ALL / LOCKED CH / EDIT CODE
How to input passcode?
1 After select P-LOCK, a passcode input screen will be
displayed.
2 Input the passcode using the Rotary encoder.
The initial default 4-digit passcode is set to 0000.
The passcode is entered one digit at a time with the Rotary
encoder.
For example, by turning to clockwise 2 steps, the number 1 is
selected.
After entering the digit, it is displayed as “l” (asterisk).
3 Press , and then input the next digit of the passcode
as described in step 2.
4 Repeat steps 2 to 3 until the 4 digits of the passcode are
entered, and then press ENTER.
After the correct passcode is entered, the CLEAR ALL/LOCKED
CH/EDIT CODE items can be adjusted.
CLEAR ALL:
Unlock all locked channels.
Turn the Rotary encoder to select CLEAR ALL YES, and then
press ENTER.
LOCKED CH:
After selecting this item, turn the Rotary encoder to select a
channel from channel list, press ENTER to select to lock or
unlock the channel. Locked channels cannot be tuned without
entering the passcode.
The locked channel will be displayed with “L” before channel No.
EDIT CODE:
Change the passcode.
1 Input the old passcode as steps 1 to 4 in “How to input
passcode?”.
After the old passcode is entered, the new passcode input
screen will be displayed.
2 Input the new passcode as steps 1 to 4 in “How to input
passcode?”.
A confirm screen (CONFIRM) will be displayed and the new
passcode must be entered again for confirmation.
When the passcode is changed successfully, the unit will
display CODE SAVED.
Note
• Keep a note of the numbers somewhere safe in case you should
forget it.
You can check the signal strength through this setting item.
 Setting item: SIGNAL IND
Setting content:
SIGNAL IND
SIGNAL IND:
This menu item displays the SiriusXM signal strength as STRONG,
GOOD, WEAK or NO SIGNAL.
Note
• If the Signal Indicator reports Weak or No Signal and your vehicle is
parked outside with no obstructions to the southern sky, then your
SiriusXM antenna may not be properly installed or may have become
damaged.
When the user tunes to a SmartFavorites channel that plays music-type
content, the tuner module plays the currently playing track for that
channel from its beginning. Therefore, the user can enjoy the full track
(i.e., song) rather than playing the channel from the current live play
point. This tuner module behavior is called TuneStart
™
. SmartFavorites
channels that play other than music-type content will start playing the
channel from the current live play point when selected.
 Setting item: TUNE START
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, TuneStart
™
mode is unavailable.
ON:
When ON, selecting a SmartFavorites channel will automatically
play the currently playing track from its beginning, depending on
the channel content type. Pressing r will return to live satellite
radio.
Note
• Displayed only when SiriusXM Tuner-SXV200 or later is connected.
Checking the SiriusXM Radio ID Number
The SiriusXM Radio ID is required for activation and can be found by
tuning to Channel 0 as well as on the label found on the SiriusXM
Connect tuner and its’ packaging. The Radio ID does not include the
letters I, O, S or F.
1 While in the Satellite Radio Mode, press  or  to
select channel “0”.
The unit displays “RADIO ID” and ID number at the same time.
2 To cancel the ID number display, select a channel other
than “0”.
Storing Channel Presets
1 Press OBAND to select the desired band you want to
store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of OBAND changes the band: SXM1  SXM2 
SXM3  SXM1
2 Tune to the desired channel, and then press and hold (for
at least 2 seconds) one of the preset buttons (1 through 6)
to store the channel.
The display then shows the stored Band and preset number (for
example, SXM1-3 is shown when preset 3 of BAND1 is selected).
The channel is designated as a SmartFavorites channel.
3 Repeat the procedure to store up to 5 other channels onto
the same band.
Notes
• A total of 18 channels can be stored in the preset memory, 6 Channels
for each band (SXM1, SXM2 and SXM3).
Setting the Parental Control
Confirming the strength of the SiriusXM
signal
Setting TuneStart
™