Owner's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- CD/MP3/WMA (CDE-SXM145BT/CDE-143BT only)
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat
- Audio Setup
- Other Functions
- SETUP
- BLUETOOTH Operation
- Setup Before Using
- BLUETOOTH SETUP
- Setting the BLUETOOTH Connection (BT IN)
- Setting the BLUETOOTH Device
- Setting the Visible Mode
- Setting the BLUETOOTH sound quality
- Setting the caller information display ON/ OFF
- Setting the Phone Book Update
- Changing the Phone book List Order
- Setting the Received Calls automatically (Auto Answer)
- Selecting the output speaker
- Displaying the firmware version
- Updating the firmware
- Hands-Free Phone Control
- About the Hands-Free Phone
- Answering a Call
- Hanging up the Telephone
- Voice Control Operation
- Calling
- Call waiting function
- Preset a number in the Phone Book (Shortcut dial)
- Dialing the preset number
- Adjusting the volume when receiving a Call
- Muting the microphone input quickly (Voice Mute)
- Call Switching Operation
- BLUETOOTH Audio Operation
- Flash Memory (optional)
- iPod/iPhone (optional)
- SiriusXM Satellite Radio Operation (CDE-SXM145BT only)
- Receiving Channels with the SiriusXM Tuner
- SiriusXM Setting (CDE-SXM145BT Only)
- Checking the SiriusXM Radio ID Number
- Storing Channel Presets
- Tuning Channels using Presets
- Storing the desired Artist and Song Alerts
- Tune Scan Function
- Tune Start Function
- Receiving and Tuning to an Alert
- Search Function
- Using Jump Memory and Jump Recall function
- Replay Function
- Parental Lock Function
- Storing iTunes Tagging information
- Changing the Display
- Information
- Installation and Connections
- LIMITED WARRANTY
10-EN
Initial System Start-Up
Be sure to press the RESET button when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press RESET with a ballpoint pen or similar pointed object.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Setting Time
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select GENERAL, and then
press ENTER.
AUDIO GENERAL DISPLAY TUNER SIRIUSXM
*
iPod
BLUETOOTH
* Displayed only when a siriusXM Tuner is
connected.(CDE-SXM145BT only).
3
Turn the Rotary encoder to select the CLOCK ADJ mode,
and then press ENTER.
The time indication will blink.
4
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
5
When the hour has been adjusted, press ENTER.
6
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
7
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
• Pressing r will return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
RESET button
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
* The illustration is for CDE-SXM145BT/CDE-143BT.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
Remote control sensor