Owner's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- CD/MP3/WMA (CDE-SXM145BT/CDE-143BT only)
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat
- Audio Setup
- Other Functions
- SETUP
- BLUETOOTH Operation
- Setup Before Using
- BLUETOOTH SETUP
- Setting the BLUETOOTH Connection (BT IN)
- Setting the BLUETOOTH Device
- Setting the Visible Mode
- Setting the BLUETOOTH sound quality
- Setting the caller information display ON/ OFF
- Setting the Phone Book Update
- Changing the Phone book List Order
- Setting the Received Calls automatically (Auto Answer)
- Selecting the output speaker
- Displaying the firmware version
- Updating the firmware
- Hands-Free Phone Control
- About the Hands-Free Phone
- Answering a Call
- Hanging up the Telephone
- Voice Control Operation
- Calling
- Call waiting function
- Preset a number in the Phone Book (Shortcut dial)
- Dialing the preset number
- Adjusting the volume when receiving a Call
- Muting the microphone input quickly (Voice Mute)
- Call Switching Operation
- BLUETOOTH Audio Operation
- Flash Memory (optional)
- iPod/iPhone (optional)
- SiriusXM Satellite Radio Operation (CDE-SXM145BT only)
- Receiving Channels with the SiriusXM Tuner
- SiriusXM Setting (CDE-SXM145BT Only)
- Checking the SiriusXM Radio ID Number
- Storing Channel Presets
- Tuning Channels using Presets
- Storing the desired Artist and Song Alerts
- Tune Scan Function
- Tune Start Function
- Receiving and Tuning to an Alert
- Search Function
- Using Jump Memory and Jump Recall function
- Replay Function
- Parental Lock Function
- Storing iTunes Tagging information
- Changing the Display
- Information
- Installation and Connections
- LIMITED WARRANTY
20-EN
*10 FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
*11 AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME mode” on page 21.
*12 CALL SOUND, CALLER ID, PB UPDATE, PB ORDER,
AUTO ANS, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
“BLUETOOTH SETUP” on page 23.
*13 The Hands free phone talk level, ring tone level and
microphone gain level can be adjusted by using this setting.
Changing the settings in the Option mode will also affect the
same settings in the SETUP menu. Refer to “Adjusting the
volume (VOL LV ADJ)” on page 24.
*14 Refer to “Setting the BLUETOOTH sound quality” on
page 24.
*15 While calling, the call sound can be switched between the
unit and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
“Call Switching Operation” on page 27.
*16 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and “VOICE MUTE”
will blink. This operation can also be done by pressing .
Refer to “Muting the microphone input quickly (Voice Mute)”
on page 27.
*17 If there is a waiting call, select this item to display the caller’s
Name and waiting number (1 or 2). Press k and the
display will switch.
*18 Select this item to hang up the call.
Notes
•Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
* The illustration is for CDE-SXM145BT/CDE-143BT.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
AUDIO
*1
GENERAL DISPLAY TUNER SIRIUSXM
*2
iPod BLUETOOTH
*3
GENERAL:
CLOCK ADJ
*4
AUX SETUP
*5
AUX NAME
*6
PLAY MODE
*7
DEMO
DISPLAY:
DIMMER TEXTSCROLL SCROLLTYPE
TUNER:
FM SET
iPod:
iPod LIST
*1 Refer to “Audio Setup” on page 15.
*2 Displayed only when a SiriusXM Tuner is connected. For
details, refer to “SiriusXM Setting (CDE-SXM145BT Only)” on
page 32. (CDE-SXM145BT Only)
*3 Refer to “BLUETOOTH SETUP” on page 23.
*4 Refer to “Setting Time” on page 10.
*5 Not displayed when the current source is AUXILIARY.
*6 Displayed only when AUX SETUP is set to ON.
*7 CDE-SXM145BT/CDE-143BT only.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
/ENTER
SOURCE/
Rotary encoder