Owner's Manual

18-EN
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
AUDIO
*1
 GENERAL  DISPLAY  IPOD  BLUETOOTH
*2
GENERAL:
CLOCK ADJ
*3
 CLOCK  CLOCK MODE  AUX SETUP 
AUX NAME
*4
 PLAY MODE  DEMO
DISPLAY:
DIMMER  SCROLLTYPE
iPod:
IPOD LIST
*1 Refer to “Audio Setup” on page 13.
*2 Refer to “BLUETOOTH SETUP” on page 21.
*3 Refer to “Setting Time” on page 8.
*4 Displayed only when AUX SETUP is set to ON.
3 Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF)
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
“GENERAL” is selected on the setup main menu in step 2.
Displaying the Time
This function controls clock on or off at power off. When the clock
function is set to ON, the unit will display clock at power off.
 Setting item: CLOCK
Setting contents:
OFF / ON (Initial setting)
Setting the Clock Display
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE
Setting contents:
24H / 12H (Initial setting)
Setting the AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
Setting the AUX NAME Mode
You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME
Note
• When the PORTABLE is set, PMD is displayed on the unit.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
SOURCE/
/ENTER

AUDIO/SETUP
Rotary encoder
General Setting